Messages

61

General / Volume calculation in DEM with wather surface

« on: December 19, 2017, 07:05:04 PM »

I need to do a volume calculation of a gravel with a lake in the mid of it.

The water level is 513,5m. I have tried to clear up the densepoints within the shoreline as good as possible, but obviosly you cannot delete every point... so probably this part is not very perfect.

Whe calculating DEM it creates also high values within the lake. But if you define the shoreline shape as a inner border for exported DEM it creates something like a hole.... please see this image



Unfortunately when trying to do a calculation over the lake it seems like there are some errors



So Im wondering how to deal with this sitation. Is there any way to have something like a cutting plane on the sealevel so that all points within this cutting plane or the shoreline Shape could be set to the right value of 513,5m Altitude?

Becouse otherwise the volume calculations "below" will give wrong values.

Thanks for helping

62

General / Re: Taking over Agisoft License

« on: December 05, 2017, 12:29:54 PM »

Dear Alexey
Im very thankful for the link to your EULA you have sent me. Im just curious how Agisoft is dealing with this European Judgement linked below regarding the selling of used software?

http://eur-lex.europa.eu/legal-content/en/TXT/PDF/?uri=uriserv%3AOJ.C_.2012.287.01.0010.01.ENG

Since we have purchased Agisoft Pro within the European Union with one of your official reseller, I suppos it should also be possible to do a simple license owner change.

I would be very thankful if you could help us in this matter...

I know this is boring for you, but unfortunately we are dealing with this unfortunate situation since one of our cofounders is leaving our company.

Thanks

63

General / Re: Building new Machine any Suggestions?

« on: December 04, 2017, 09:45:16 PM »

Would you Advice NVIDIA GeForce 1080Ti or AMD Vega 64 GPUs? I know the Puget article and Im thinking of buing 2-3 GPUs...

64

General / Re: Taking over Agisoft License

« on: December 04, 2017, 02:52:06 PM »

Yes Ill do. But could you please answer if a transfer of the license is possible?

65

General / Changing Ownership of Agisoft License

« on: December 04, 2017, 02:07:40 PM »

Im wondering if it is possible to change a purchased License to someone else ownership... one of our partners, wich own Agisoft Pro, is leaving the company and he asked us to pay him the License out.

Is this possible, Alexey?

This would be great
Thanks for helping

66

General / Re: Building new Machine any Suggestions?

« on: December 04, 2017, 07:58:46 AM »

and Im also wondering if its better to have one AMD Threadripper 1950X (16 Cores,  32 Threads, 3,6 GHz) or to use 2 Intel Xeons E5-v3 (2x 14 Cores, 28 Threads, 2Ghz - 3 GHz) combined with 2x GeForce GTX 1070Ti

But Im note shure if the new AMD Vega GPUs are better for Agisoft or not...
What do you think? Wich computer would you go? The Intel XEON Plattform is 300-400 EUR more expensive

67

General / Re: Building new Machine any Suggestions?

« on: December 03, 2017, 04:33:04 PM »

@MapFool
Is there any LGA2011 Dual-Processor Mainboard out there in ATX Size? Becouse the only one I could find where ATX-E and those are more large and don't fit in an ATX Cas

68

General / Re: Photoscan Pro on cloud based virtual machine

« on: December 02, 2017, 03:19:10 PM »

how long did it take to calculate, and how much did you pay? Where can I find the details about the GPU?

69

General / Re: How to deal with lakes

« on: November 28, 2017, 01:33:15 PM »

Masking means in each photo? There was hundreds of images

70

General / Re: Exporting Contours from DEM

« on: November 27, 2017, 02:04:13 PM »

btw. can we also add a feature to smooth contours with a certain level? Also is it possible to export the Orthomosaic togheter tiwht the Contours?

71

General / Re: Exporting Contours from DEM

« on: November 27, 2017, 01:58:46 PM »

Found it.... I can import the DXF file in QGis, but not the shape files.... it doesn't open it at all or doesn't show any information

72

General / Exporting Contours from DEM

« on: November 27, 2017, 01:00:43 PM »

Im wondering what the best way to export Contours is. I know I can export them from the Export Shapes Function. But is there any way we can export the also as DWG/DXF?

QGis is not able to open the generated contours from Agisoft...

Thanks

73

General / Re: Help! "Can't Open File" errors in 2 recent projects

« on: November 26, 2017, 07:45:56 PM »

I suppose that this is exactly the cause for this strange behavior... Im now rendering all the missing parts, let me finish it so that I can deliver everything to my client, than we talk about it tomorrow how to fix this

74

General / Re: Help! "Can't Open File" errors in 2 recent projects

« on: November 26, 2017, 06:58:07 PM »

I could reactivate the model by renaming elevation1 to elevation and it was able to open Itl It seems that the XML Files from Agisoft are not written correctly... we need to find a better solution, becouse all the Elevations, models, Orthomosaics are still in the .files folder... but Photoscan cannot recognize it. I need now to recalcualte everything...

Or make an import function available so that I can import models, ortho & elevation from .files folder...

75

General / Re: Help! "Can't Open File" errors in 2 recent projects

« on: November 26, 2017, 02:41:16 PM »

I have again an issue.... and Im desperated... I have again lost the work of almost 1 week with this errors in Agisoft...

Now it cant find the elvetation.zip file of the chunk, but it is still there on the disc.... whats going on. I cant deliver the project to my clients and Im loosing thousends of euros becouse of this Agisoft bugs...