Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - Reservoirdog

Pages: [1] 2 3
General / Re: Changing the Point of Rotation?
« on: November 29, 2023, 05:51:56 PM »
Or even faster, just simply do a double-click... it will adjust the rotation point to that position you clicked.

Bug Reports / Re: Metashape crashing during Align step with no error
« on: August 16, 2023, 03:01:00 PM »
I think it's always quite important to tell the version of Metashape you are using...  :o

Workaround for the moment, is to use 1.8.5.
I did it that way.
The Project-Files can be opened in 1.8.5 and 2.X without any compatibility issues.

Bug Reports / Re: Space mouse in Agisoft Metashape
« on: August 10, 2023, 11:34:39 AM »
I can officially confirm, that the problem is fixed in Metashape 2.0.3!
SpaceMouse is back behaving normal, like in old versions.
Thanks for fixing this issue and best regards,

Bug Reports / Re: Space mouse in Agisoft Metashape
« on: June 15, 2023, 03:23:52 PM »
I tried inverting all axis, with no sucess.
The problem is not the direction of axis, it's the axis being swapped.

examples using attached screenshot:
- (Pan Up/Down ) now zooms in/out instead to pan up/down
- (Zoom In/Out) now pans up/down instead to zoom in/out

- (Spin)  now rolls the map instead to "yaw around Y axis"
- (Roll) now spins (yaw around Y axis) the map instead to roll

- (Pan right/left) works
- (Tilt) works

I am using latest Metashape and 3Dconnexion SpaceMouse compact

edit: seems like the exact same behaviour as eric423 stated

Bug Reports / Re: Space mouse in Agisoft Metashape
« on: April 19, 2023, 11:06:12 AM »
Have to upvote this again...
It's such a pity to be confronted with this problem, as the controller was working fine for years.
Alexey, please, can you investigate?

Bug Reports / Re: Space mouse in Agisoft Metashape
« on: February 22, 2023, 05:00:43 PM »
Hey Alexey, Windows 10 22H2
But it has been working in earlier versions of metashape, also on Win10

Bug Reports / Re: Space mouse in Agisoft Metashape
« on: February 22, 2023, 03:31:43 PM »
Hey Bo, has this ever been solved for you?
I have exactly the same problem. The axis of the space mouse respond weird.
I had an old "Space Navigator", everything worked flawlessly with that controller.
Now I have the Space Mouse and have these same problems:
- rolling instead of rotating
- zooming instead of rise/lower viewport

Bug Reports / still, 3Dconnexion Space Mouse, since 1.8.3
« on: February 22, 2023, 03:28:35 PM »
I have the same problem as described here:

The 3DConnexion Space Mouse works, but the moving/rotating is weird now.
As described in the linked thread, when rotating the space mouse, it doesn't rotate the model anymore,
it rolls the model. Same is for up/down. In earlier versions, pulling the mouse up would rise the viewpoint (z-axis),
but now it "zooms in or out".
It seems, some moving/rotating axis got messed up. In the settings, it is only possibel to invert axis, but you cannot assign axis to viewport functions.
I don't know exactly since which version this problem came in, but it's a pity, because I worked a lot with the space mouse controller.

Feature Requests / Re: Tool to decimate dense point cloud
« on: May 14, 2020, 05:23:23 PM »
This is already in Metashape. Right click on your Dense Cloud -> Filter Dense Cloud

Yes, it is possible to reduce with fixed point-distance.
But you can neither select a point-"target" nor can you reduce in a "smart way".

Feature Requests / Tool to decimate dense point cloud
« on: May 14, 2020, 04:16:05 PM »
I know there are similar request, but I want to start a new one.
To create really nice Orthophotos, we tend to produce very large dense point clouds. (500 Mio. points and more)
When we have to export points to other companies for planning purposes, we often have the difficult
task to decimate the point cloud.

At the moment, this can only be done using third party software like CloudCompare or FME.
A tool directly in Metshape would be very convenient, even better would be a tool which uses several ways (algorithms)
to achieve the decimation, e.g. total number of points, space between points, and some smart algorithms to decimate points
at planar areas instead of curvy (high altitude changes) areas.

thx for considering this request for future builds, also keep up the great work!
Metashape is a fantastic and capable product!

best regards, Chris.

General / Re: Cesium 3d tiles not working in Cesium anymore
« on: March 16, 2020, 01:15:07 PM »
Hey Alexey,

Thanks for your information.
I sent an email with data and report.

In the meantime I could test the cesium output from Photoscan 1.4.2
It works in our cesium environment!

General / Re: Cesium 3d tiles not working in Cesium anymore
« on: March 13, 2020, 02:52:12 PM »
Unfortunately, we cannot upgrade to 1.58 very quick, because Cesium has been implemented and modified to work properly in our GIS software.
Is it possible to export the tiled model with an old build of Metashape (Photoscan 1.4.2)?

edit: I did an install of 1.4.2, and realized that I cannot open Metashape-Projects. Also, I am unable to import a tiled model in old Photoscan.
What would be the best way to get my model in old Photoscan?
edit2: Nevermind, got it working (export project as metashape 1.4.X, open in old Photoscan, Recreate TiledModel)

Will get back here and report if the cesium-export works...  :-\

General / Re: Cesium 3d tiles not working in Cesium anymore
« on: March 12, 2020, 06:34:11 PM »
Hey Alexey,

We are using Version 1.55

General / Re: Cesium 3d tiles not working in Cesium anymore
« on: March 12, 2020, 04:21:38 PM »
Hey Alexey,

When exporting the tiled model to cesium, there are no parameters one could switch (greyed out, see screenshot).
The exported Zip-File has a size of 1.1 Gigabytes.

Should I provide you the export?

Pages: [1] 2 3