Messages

1

General / Build DEM using lowest points (bottom of grass/vegetation)

« on: October 14, 2024, 05:40:51 PM »

I would like to build a DEM that primarily uses the lowest LiDAR points scanned of a grassy terrain, to get as close to the ground surface as possible. I am using the Planar Bottom XY projection, can anyone confirm if this would be the best approach? Use examples of the different planar projection methods would be helpful.

2

Bug Reports / Re: Export Model - Clip to Boundary Shapes Overlap

« on: September 11, 2024, 06:57:42 PM »

Bump

3

Bug Reports / Re: DIsabled Interpolation during meshing still results in interpolated mesh

« on: August 06, 2024, 04:22:05 PM »

I will upload some case examples, but it is quite easy to re-create, pretty much happens on any meshing using a point cloud with arbitrary surface type.

4

Bug Reports / Export Model - Clip to Boundary Shapes Overlap

« on: August 06, 2024, 03:54:38 PM »

I am exporting a model and enabling clip to boundary shapes. Due to the large scale of the object, I have several overlapping shapes to cover the area of interest. However, the exported object is divided where the shapes overlap. I would expect the overlap area to be additive, but it appears to be subtractive. Is there a way to combine multiple shapes into a single shape or is this indeed unintended functionality?

5

Bug Reports / Re: DIsabled Interpolation during meshing still results in interpolated mesh

« on: July 26, 2024, 07:18:01 PM »

I was really hoping this bug would be fixed in version 2.1.2. But sadly, it is not. Any ETA on the fix for this???

6

Bug Reports / Re: DIsabled Interpolation during meshing still results in interpolated mesh

« on: May 30, 2024, 04:05:07 PM »

Quite frustrating. It seems it should be such a simple fix. The interpolation is causing quite a headache when having to clean up unwanted geometry. I sent a PM to Metashape staff with no response, so I will send again.

7

Bug Reports / Re: DIsabled Interpolation during meshing still results in interpolated mesh

« on: May 01, 2024, 11:54:34 PM »

Any updates?

8

Bug Reports / Re: DIsabled Interpolation during meshing still results in interpolated mesh

« on: March 18, 2024, 09:15:34 PM »

Have you been able to re-create the issue?

9

Bug Reports / Re: DIsabled Interpolation during meshing still results in interpolated mesh

« on: March 12, 2024, 02:33:34 PM »

Yes, same problem. I just tested meshing with depth maps, volumetric masks, and interpolation disabled but still appears to be interpolating.

10

Bug Reports / Re: Meshing Interpolation Disabled produces interpolation

« on: March 12, 2024, 02:13:12 PM »

This is becoming a very frustrating problem. Agisoft, please fix the disabled interpolation bug!!!

11

Bug Reports / Meshing Interpolation Disabled produces interpolation

« on: February 20, 2024, 03:24:27 PM »

See screenshot. This has been encountered in numerous projects and by other users.

https://www.agisoft.com/forum/index.php?topic=16247.0

12

Bug Reports / Re: DIsabled Interpolation during meshing still results in interpolated mesh

« on: February 20, 2024, 03:22:26 PM »

See screenshot. This clearly seems to be a bug.

13

Bug Reports / Re: DIsabled Interpolation during meshing still results in interpolated mesh

« on: February 19, 2024, 04:32:42 PM »

Similar issues:
https://www.agisoft.com/forum/index.php?topic=16056.msg69180#msg69180

https://www.agisoft.com/forum/index.php?topic=14636.msg67740#msg67740

https://www.agisoft.com/forum/index.php?topic=15713.msg67979#msg67979

Need I find more?

Can this be fixed?

14

Bug Reports / DIsabled Interpolation during meshing still results in interpolated mesh

« on: February 19, 2024, 04:26:54 PM »

I've had this issue in prior versions and from other posts it appears others are also having a problem with "disabled" interpolation and resulting meshes appearing to still be interpolated.

For what it's worth, the projects I have experienced this with include LiDAR data.

I am meshing a flat surface, using strict volumetric masks, Depth Maps + Laser scans. The resulting mesh edges of the flat surface are rounded off. This causes quite an inconvenience in the workflow for this project.

Version 2.1.0 build 17532

15

General / Re: WGS84 to local coordinates (m) with false easting/northing projection (PRJ)

« on: November 22, 2023, 07:28:42 PM »

Alexey. here is a thread that took me down this path for the coordinate conversion, specifically mesage 10 by Pointdump:

https://forums.autodesk.com/t5/civil-3d-forum/changing-world-0-0-point-in-a-georeferenced-file/td-p/9714275

I am trying to get Metashape data to Autodesk 3DSMAX while being able to set the point of origin of the data, ideally, to one of the markers - maybe this can be done through another method.