Show Posts

1

General / Re: RTK Positioning accuracy with Mavic 3E

« on: April 11, 2024, 12:44:54 AM »

Quote from: dpitman on April 10, 2024, 11:48:50 PM

Quote from: Dieter on April 09, 2024, 04:07:43 PM
A little tip, there is such a function in many web browsers, which is called translator

Good tip. If you don't read the forum default language you could use it.

As a bonus,you might get participation from a lot more users that have experience with the issue you are having.

Cheers!
Dave

This is my point exactly, this will not allow others to participate reading or commenting. Stating using a translator on a forum English is used is pretty rude.

2

General / Re: RTK Positioning accuracy with Mavic 3E

« on: April 08, 2024, 09:06:30 PM »

There is a separate forum for other languages. Please use English so others can participate.

3

General / Re: DEM - can it be shifted down in height?

« on: March 30, 2024, 04:05:11 PM »

You can easily do this in QGIS.

4

General / Re: Export Reconstruction Region in WGS84 Mercator Projection

« on: March 30, 2024, 04:02:52 PM »

Dont use WGS84 for 3D software, its horrible workflow. Use Local or find a EPSG coordinate space you work with usually.

5

General / Re: Workstation setup for 210mpx oblique camera

« on: March 27, 2024, 06:17:29 PM »

210MP you probably mean using 5 different sensor/lenses/cameras? Not a single 210MP frame?

20.000 you can run easily on regular medium powerful workstation.

6

General / Re: Agisoft Metashape 2.1.0 pre-release

« on: March 16, 2024, 03:13:18 PM »

Quote from: bassistas on March 16, 2024, 08:26:33 AM

Quote from: Alexey Pasumansky on November 23, 2023, 03:55:14 PM
Hello bassistas,

Can you provide more detailed description of the steps followed starting from model generation (also specify the coordinate system of the chunk, model and CS options in export/import dialog)? I was not able to reproduce any problem with export-import workflow for FBX model in the latest pre-release version.

The issue still exists in the latest stable release 2.1.0. The project contains photos from a DJI drone and laser scans imported as e57 files. The coordinate system is WGS 84, it doesn't matter which options I choose during the export or what file format, the exported model always comes up shifted by a few meters from the original position. I can send you an example project (without the photos and laser scans) to investigate if you want.

Sounds like your problem is because you are using WGS84 as coordinate space, why not use a real coordinate space with accuracy and measurements, not something in degrees.

7

General / Re: Incorrect Show image with calibration with k4

« on: March 13, 2024, 01:05:07 PM »

This is from Agisoft support.

Quote

Based on the available information from DJI, calibration using dewarp does not use the k4 parameter and when calibrating, it uses a camera type like fisheye.

Please try to set the camera type - Fisheye and fix k4 = 0. Then compare the calibration results. We think this can improve the calibration result.

8