Messages

346

Bug Reports / Re: Ground Control and Coordinate system - crazy error.

« on: August 12, 2011, 04:46:01 PM »

I can see Photoscan has only EPSG::4659

I wonder if I am using EPSG::4944 or some other...

Let me look into this a little bit.

There are 12 ISN in EPSG...

347

General / Re: Agisoft PhotoScan 0.8.3 pre-release

« on: August 12, 2011, 04:00:26 PM »

Reason was I wanted to check if I was getting the same errors in Ground Control in the older versions. But then I ran a test in the older versions and got the same problem, I then posted it in the bug forum about the Datum.

348

Bug Reports / Re: Ground Control and Coordinate system - crazy error.

« on: August 12, 2011, 03:58:13 PM »

Hello olihar,

You need to input data in the coordinate system you are planning to work with.
PhotoScan supports conversion between coordinate systems in the same Datum, but conversion between different Datums is not supported by now.

Are you sure that data on "ISN93" screenshot is in real coordinates but not in local?

Yes thats what I did first inserted ISN93 data into the fields and used ISN93 and got this massive error, then I tried same data using local and it seemed fine.

Then I manually converted the ISN93 data into WSG84 as I wanted to try and see what Photoscan would do then. Then the identical location data just different Datum/format and it worked fine as you can see.

I just wonder if there is something wrong with the ISN93 in Photoscan.

349

Bug Reports / Ground Control and Coordinate system - crazy error.

« on: August 12, 2011, 12:17:38 PM »

Seems very strange to me, the only coordinate system I seem to get to work is local Coordinates and WGS 84, I started with ISN93 and converted them straight to WGS 84 so its the same location.

Local Coordinates, looks good.


WGS 84 looks good.


WGS 84 Looks correct in Google Earth.


Now however.

All the other coordinates system I tried seemed to fail like

ISN93 big fail.


ISN93 in Google Earth.


I tried various other ones, they all seemed to fail. Could there be something wrong with ISN93 for example.

Any ideas.

350

General / Re: Agisoft PhotoScan 0.8.3 pre-release

« on: August 12, 2011, 11:57:27 AM »

I can not open projects made with this version Build 1096 with Photoscan Build 985.

If the project has not been textured, I can see the model, but there is no info and its like I have to run the project again.

btw. most recent prerelease build is 1132
just wanted to throw this in because it is only mentioned in the changelog and many might have missed that.

best regards
Jan

Problem is still in this version as well.

351

General / Re: Agisoft PhotoScan 0.8.3 pre-release

« on: August 12, 2011, 12:25:58 AM »

You're right

"This pre-release is considered as unstable and is not recommended for production use."

Worth knowing for people, and there might be an easy fix.

352

General / Re: Agisoft PhotoScan 0.8.3 pre-release

« on: August 11, 2011, 08:35:34 PM »

I can not open projects made with this version Build 1096 with Photoscan Build 985.

If the project has not been textured, I can see the model, but there is no info and its like I have to run the project again.

353

Feature Requests / Double click to move Trackball

« on: July 11, 2011, 05:09:52 PM »

Suggestion of when you double click on the model it will move the Trackball's center to the triangle/point you double clicked on in the model. Would make much easier navigation.

354

Feature Requests / Re: Texture - size, format, layered

« on: July 11, 2011, 05:06:55 PM »

Just so I keep this a little up more.

Would it be possible to use a texture from X image by using Keep UV.

As the option is grayed out when Keep UV is selected.

Then if that is possible a batch could be created to export each image as texture with only 1 photo and black "mask" for the rest. Then fixed could be done in post processing for bad seams in the texture created with all the images.

355

General / Re: minimal gpu usage

« on: July 07, 2011, 11:30:21 PM »

You know that the GPU is only used on the meshing part...

356

Feature Requests / Re: Texture - size, format, layered

« on: July 05, 2011, 08:36:15 PM »

What about layered texture file for manual seam editing, where you got all the images in 1 layer then a flattened layer in the bottom of the file.

357

Feature Requests / Texture - size, format, layered

« on: July 05, 2011, 04:46:55 PM »

It would be great to be able to work with other then jpg texture files, for example 16bit Tif files or PSB files.

So one can do larger then 30k textures and not limited to 8bit. As long as input images are of course 16bit tif files.

Layered texture file would be very handy as well, where one could go in and manually edit seams that Photoscan might have some trouble with in Photoshop for example.

358

General / Re: Alignment of chunks against known gcp coordinates

« on: May 31, 2011, 07:06:02 PM »

I think this is a feature request right there, The Geo referenced flags get a priority on the simple named ones without any location data. So it is possible to merge large amount of chunks together without all of them having to have ground control points.

Could maybe make another align flag, 1 align one for ground control.

359

Feature Requests / Re: Command line access

« on: May 19, 2011, 07:47:35 PM »

I indeed think this could be interesting to be able to run the whole process in one go through the command line, in steps of all at once.

As well with the possibility to input your own data if wanted, for example a bundle.out file or your own mesh. Just to name 2 things.

360

General / Re: Texture Blending

« on: May 19, 2011, 07:44:30 PM »

A little bit more on this.

It would be nice if it was possible to get a different format then JPG as output, to make it possible to do larger then 30K textures. Say, TIF, PSD or PSB.

Output Layered texture, This would have each camera projection in 1 file or Layer. For blending of your own.