Messages

76

General / depth map output based on point cloud

« on: July 15, 2014, 09:43:22 PM »

Is there a way too create depth map from the point cloud for each image.

once I align the images I clean up the point cloud.  After that I would like to create a depth map of each image, or even just render out the depth point cloud.

Thanks.

77

General / Re: Import georeferenced camera calibration and orientation into photoscan

« on: May 13, 2014, 04:25:21 PM »

unfortunatly you can not. 

The only thing you can do is in the settings under ground control set the camera accuracy to 0.

but I found that photoscan still likes to move the pictures.

It would be great to be able to move cameras manually and lock them down.

78

General / yaw pitch and roll off

« on: February 13, 2014, 07:40:18 PM »

For my process I am more interested in the Camera xyz yaw pitch and roll.

After aligning the camera's placing the GCP markers and optimizing. I look at the excel sheet.

Transfer the coordinates to our software and the yaw pitch and roll  are off.

The xyz seem to be fine.

When I take a look in photoscan the markers are all in the correct spots even if I clear markers just to see the GCP spots they are correct.

Thanks for any help trying to get these more accurate.

79

General / Yaw, Pitch and Roll incorrect

« on: January 27, 2014, 04:09:39 PM »

I have tried to align some images and find that the est yaw,pitch and roll are way off and not consistent.

Is there a way of getting these better?

80

General / Bring survey to help align pictures?

« on: August 02, 2012, 06:49:16 PM »

With our project we are looking at. We already have the Elevation from surveyors.  But the pictures GPS is not the accurate.  is it possible to bring in the surveyor data to help align the images better.

Normally we go through this by hand but we have a lot of images.


Also if it is possible to put the updated lat long back into the images

Been playing with the demo, and wondering if I am missing something somewhere.