Messages

31

General / Re: Z800: quadro and geforce can coexist?

« on: December 12, 2012, 02:38:10 PM »

48 photos. 14 megapixel
clean test. calculate the same depth map
7970 graphics card is only much faster. 10-20% of max.

32

General / Re: Z800: quadro and geforce can coexist?

« on: December 12, 2012, 04:42:29 AM »

I do not think that the 7970 card data is accurate.


I have both cards and I did test
old card GTX 580 4.20 s
ATI 7970 3.50 s

33

General / Re: One or two graphics cards?

« on: December 11, 2012, 04:40:04 PM »

sometimes the bigger problem is the alignment images.
How can I, for example, 300-400 photos. aligning images takes 5-6 hours, or even 12 hours. weaving.
Mesh generation for medium quality takes about 2-3 hours.

Alexey :The best thing you can do is support the GPU in the process of aligning images ..
GPU at every stage

34

General / Re: One or two graphics cards?

« on: December 11, 2012, 04:21:47 PM »

Hi, I have version 9.0.9.
See general improvement of the program.
Conducted the study.
I watched the work of processors.
And it works for me so

30 minutes to equalize photos. (Only CPU 100% )
Generating a depth map .20 min (100%  processor  + GPU  graphics card )
mesh generation. 2h 10 min!   (80 percent of the time, working only 1 core !)
decimating mesh 8 min ( 1 core )

My machine.
Dual Xeon 3.0 GHz 12 core / 24
ATI 7970 Graphics
48GB RAM

35

General / Re: One or two graphics cards?

« on: December 11, 2012, 03:34:36 PM »

Graphics card will only slightly in the calculations.
This bottleneck mesh generation procedure.
For me, the calculation of the depth map is very fast.
But then wait a long time to generate the mesh.
For example, the
30 minutes to equalize photos. (Only CPU 100% )
Generating a depth map .20 min (100%  processor  + GPU  graphics card )
mesh generation. 2h 10 min!   (80 percent of the time, working only 1 core !)
decimating mesh 8 min ( 1 core )

My machine.
Dual Xeon 3.0 GHz 12 core / 24
ATI 7970 Graphics
48GB RAM

During operation, often running only one processor.
This is the bottleneck of the program.
A programmers should do something about it.
Because even a very fast computer will not help.
When only one processor counts!

For this optimal computer.
It must be very very very fast processor.
I recommend tuning I7 machine. to 4.5 GHZ. 6 core
This will work better than a Dual Xeon 3.0 GHz
A large amount of memory very useful if you need the highest quality

36

General / Re: Quality of Merged Chunks

« on: November 10, 2012, 10:56:29 PM »

I know it's an old post.
But the problem is still not fixed.
The combined cuts, have poor quality fuzzy.
It seriously limits the possibilities of the program.
How it will be repaired, the memory limitations are no longer an issue.
You will be able to build a huge scene

I beg you amend your same functions?

37

Feature Requests / Re: Cylindrical UV Mapping (or Unwrap) with Relax solution and Blurry Texture issues

« on: October 24, 2012, 02:54:19 AM »

hello infinite 

what program do you recommend to unwrap.
It actually improves the texture thanks for the tutorial

38

General / Re: 5D model Experimental

« on: October 17, 2012, 08:28:38 PM »

UPSSS it should work


http://www.youtube.com/watch?v=pNySMVvLPII

39

General / 5D model Experimental

« on: October 17, 2012, 03:24:12 AM »

Experimental scanning time 5D

http://www.youtube.com/watch?v=pNySMVvLPII

40

General / Re: Who can save the goddess

« on: October 01, 2012, 03:16:53 AM »

I already know that these programs have a lot of limitations.
But I know that The question of time.
And scans will look better than it actually is.
Just my expectations were too high.

41

General / Re: Who can save the goddess

« on: October 01, 2012, 02:29:44 AM »

I think that the goddess has been saved.
However, I had to use arcane spells

42

Feature Requests / Re: Cylindrical UV Mapping (or Unwrap) with Relax solution and Blurry Texture issues

« on: September 25, 2012, 05:42:17 PM »

Very good guide. Thank you very much
I noticed that your camera is set to stereo.
Is the stereo setting gives better quality?

43

Feature Requests / Re: Lasso tool

« on: September 25, 2012, 05:35:47 PM »

I also thank you very much.
Now I have a lasso, it will happen

44

General / Re: Who can save the goddess

« on: September 21, 2012, 09:23:52 PM »

Diegotorres ,Hey, it looks a lot better than my job.
You tell me how you did it.
You used Agisoft.
Maybe some additional processing for product images?.
How did the mask, you're crazy 

45

General / Re: Galleria Vittorio Emanuele II di Milano

« on: September 17, 2012, 02:04:30 PM »

I used a new experimental technique.
And some secret magic spells.
And all began to work