Messages

76

General / Re: Why photoscan over 123Dcatch ? newbie

« on: September 10, 2012, 09:17:00 PM »

to Wishgranter:
I do not think this is the review article 123Dcatch technology.
I ran hundreds of tests and unfortunately Agisoft program very much disappointing.
Here you can compare and 123Dcatch , Agisoft.
123Dcatch !

Agisoft

Agisoft

123Dcatch !



my conclusions.
Agisoft works well but only in the laboratory.
Is a program for the reconstruction of planar surface structure.
The complex lumps, concatenate the empty space creates a lot of mistakes.
Quality is totally unacceptable.
The only plus is the quality of the textures ...

77

General / Re: Who can save the goddess

« on: August 27, 2012, 11:11:12 PM »

Hello Alexey,
I send you all the pictures for this property.
Maybe you could save the goddess

I've tried everything.
Versions for 150 photos, 75,
high quality
Photos are perfectly straight, without distortion
scene
https://www.wetransfer.com/dl/H279eJTS/d2e07b1ea0f7b17a18db6660f047d3acad56b82245b0da51ba983964454d26ac5f09ed5d4e3a5d5

foto
https://www.wetransfer.com/dl/UQD708Es/eef1c7fdd1e5ab6609913cd8f6109deda24421b47d7a6afeb8554f30d8da325c80b60e4e4e10f52

78

Feature Requests / Re: Gallery..?

« on: August 27, 2012, 12:50:28 PM »

new version of the program ( 0,9,0)is not well understood at times my camera calibration.
I used adobe lightroom, preset for the lens.

79

Feature Requests / Re: Gallery..?

« on: August 27, 2012, 11:20:34 AM »

The design of the interior.
Urzy?em 150 photos 21 megapixel lens and 24 mm.
Photos straightened in Lightrum
It worked better than the calibration.
Project caterral 8, urzywa?em autodesk 3d 123D catch.
I did not know back then agisoft.

80

Bug Reports / Re: The program turns off REGULAR TEST SCENE monument.zip.

« on: August 27, 2012, 03:31:33 AM »

I have to make a mask for all the pictures?
It's a very labor-intensive.
Faster will do a model by hand
However, older versions of the program, calculate the scene.
And everything works without masks...

81

Feature Requests / Interior 3D Scanning

« on: August 27, 2012, 03:13:30 AM »

http://www.youtube.com/watch?v=7XYWY3hmPTw&feature=youtu.be

82

Feature Requests / Catedral 8

« on: August 27, 2012, 03:07:30 AM »

http://www.youtube.com/watch?v=-mJI3gyeCIo&feature=relmfu

83

General / Who can save the goddess

« on: August 27, 2012, 02:30:05 AM »

I took 150 photos.
And many hours of processing.
But the goddess Yamantaka still does not look good: (
Does anyone have any idea how to improve the quality of this model.
Very bad Lookin gap between the elements.

35mm lens with no distortion.
Canon 5D II 21 Mp
May mask would be a solution, but I can not make a mask for 150 photos.
Processing done at medium quality.





http://desmond.imageshack.us/Himg825/scaled.php?server=825&filename=jam2nw.jpg&res=landing
http://desmond.imageshack.us/Himg213/scaled.php?server=213&filename=jamantaka.jpg&res=landing

84

General / Re: ... about Networking Pscan

« on: August 25, 2012, 04:44:57 AM »

I have, 9 computers with the same parameters
.
I will gladly test it

85

General / Re: Agisoft PhotoScan 0.9.0 pre-release

« on: August 23, 2012, 02:33:06 AM »

can not comprehend that my friend  diegotorres
But if it works then you're great

Tomorrow I'll try to understand it.
How not to understand.'ll Ask you to

thanks

86

General / Re: Agisoft PhotoScan 0.9.0 pre-release

« on: August 22, 2012, 06:54:39 PM »

Alexey Thanks for the information. But it does not solve the problem.
Old versions 0.8.3, did a good fit cameras automatically.
So they were more intelligent ?

For now what I have manually reset the camera?
How do I know which is the wrong fit?
This is a simple project for five cameras.



In a very complex projects, from 100 upwards camer.
I can not imagine manually adjust the camer.
Look at my first post, in the same project is a 34 camera
And everything fell apart, a newer version could not.
I tried to re-convert the old projects
and the effects are terrible
Soon sending more complex scene and try to do it.
good luck

Link to photos
https://www.wetransfer.com/dl/21RXevJ8/90b3ba607bb7dffa11c2a6916b6fdaeb4f3ccd7553d1821f91647c59d02d1358d7e466384d281cf

link to the scene in the picture
https://www.wetransfer.com/dl/dK1vv29T/7d6c917f59489478c634e8a71777c8563aeae565b9abafec6f6e441a35fc4fdc8bf120a94d2cc9c

87

General / Re: Agisoft PhotoScan 0.9.0 pre-release

« on: August 22, 2012, 04:25:24 PM »

I never used the option fix.

I did a test now enabled fix.
Scene looks much worse

88

General / Re: Agisoft PhotoScan 0.9.0 pre-release

« on: August 22, 2012, 02:08:26 PM »

so are the problems in the various stages.
Connecting the camera from different angulation is very problematic.
The new program completely lost where the old program works beautifully.
When scanning the facade, the new version works fine but clearly you can see lower quality.
Scanning the interior finishes, a total failure

The align the new version brings more points.
But it does not give better quality.
Generating mesh run faster. Sometimes computation for multiple cores.
But there are situations where in the process created a sudden very large memory requirements.
Please check your example monument.zip
I'll do some other tests for other lenses

sending a test scene,
photographs + camera calibration

https://www.wetransfer.com/dl/b46Zpz4P/ea7a5c7dbb1a1001a47a786fdca22e31fb16e564a72daf1e737d406a3981b568ecc4d7b74d145d4

89

General / comparison 0.85.0 0.9.0 ALIGN Problem

« on: August 22, 2012, 07:24:52 AM »

comparison 0.85.0    0.9.0
exactly the same settings

the new version works, very strange
as for me, the quality deteriorated
is a big problem with the function align



I've done a dozen tests on different images.
Always the same settings.
always well-calibrated camera
And the new program works very bad

90

Bug Reports / The program turns off REGULAR TEST SCENE monument.zip.

« on: August 21, 2012, 11:36:19 PM »

REGULAR TEST SCENE monument.zip.
The old version of the program, the grid generated normally.
The maximum load on the memory up to 8GB.
New version 0.9.0, the same scene.
The same settings.
Generating a 3D model, the failure of memory is.
The program turns off
The computer has 24 GB of RAM