Author Topic: Remove Calibrate Reflectance  (Read 1322 times)


  • Newbie
  • *
  • Posts: 6
    • View Profile
Remove Calibrate Reflectance
« on: January 07, 2019, 04:03:17 PM »

I used "calibtrate reflectance" with sun sensor and the reflectance panels on my agisoft projects (camera: Micasense Red Edge M). However, I would like to export an orthomosaic with sun sensor calibrated only. Is there a possibility to remove the calibration? Do I have to start the whole project all over?

Thank you for your answers

Alexey Pasumansky

  • Agisoft Technical Support
  • Hero Member
  • *****
  • Posts: 14965
    • View Profile
Re: Remove Calibrate Reflectance
« Reply #1 on: January 07, 2019, 05:42:03 PM »
Hello Sparkling_Water,

You need to reset or restart the reflectance calibration operation with the different parameters and then rebuild the orthomosaic.

If you want to keep the previos mosaic in the project, then you can make the orthomosaic inactive (right-click on the orthomosaic label in the Workspace pane and uncheck "Set as default" option) before running Build Orthomosaic operation.
Best regards,
Alexey Pasumansky,
Agisoft LLC