Forum

Author Topic: Poor results using new Depth Maps, vs Dense point cloud  (Read 4066 times)

holoped

  • Newbie
  • *
  • Posts: 4
    • View Profile
Poor results using new Depth Maps, vs Dense point cloud
« on: January 08, 2019, 11:13:24 PM »
Hey all,
I've been testing the new Depth Maps feature and I'm getting poor results.

See picture for a scan I shoot a while ago. Using depth maps you can see the whole back of the car is missing. The same set of images were used for both scans (about 180).

https://www.dropbox.com/s/g9b3irkhorxn49y/RustyCar.jpg?dl=0

Processing tool about 3 hours on a GTX 1070. Settings were all set to medium.

Any ideas how to improve this?

Mak11

  • Sr. Member
  • ****
  • Posts: 387
    • View Profile
Re: Poor results using new Depth Maps, vs Dense point cloud
« Reply #1 on: January 09, 2019, 12:51:04 AM »
Can you make sure that the depthmaps are identical in both projects?
Also try to gerenate de mesh on high with the new method to see if there's any major difference.

Mak

Alexey Pasumansky

  • Agisoft Technical Support
  • Hero Member
  • *****
  • Posts: 15275
    • View Profile
Re: Poor results using new Depth Maps, vs Dense point cloud
« Reply #2 on: January 09, 2019, 11:41:10 AM »
Hello holoped,

For me is looks like there are some alignment problems in the left side of the picture.

Can you share the source dataset and the project with the new mesh to support@agisoft.com, so that we could investigate the issue?
Best regards,
Alexey Pasumansky,
Agisoft LLC