Forum

Author Topic: Reuse dephmaps  (Read 140 times)

Dieter

  • Jr. Member
  • **
  • Posts: 56
    • View Profile
Reuse dephmaps
« on: February 21, 2019, 04:09:30 PM »
Hello,

I work with the settings "reuse depth maps on".

First, I calculate the point cloud, so the depth maps are stored in the project. Then I would like to reuse the depth maps for the mesh calculation. This does not work for me. The depth maps are always recalculated. The setting for the depth images is "high".

What am I doing wrong?

Metashape 1.5.1

Thank you
Dieter

Alexey Pasumansky

  • Agisoft Technical Support
  • Hero Member
  • *****
  • Posts: 10167
    • View Profile
Re: Reuse dephmaps
« Reply #1 on: February 21, 2019, 04:30:57 PM »
Hello Dieter,

Currently mesh generation from the depth maps accepts only the depth that is generated using Mild filtering option. So if the dense cloud generation assumed Aggressive filtering option, such depth cannot be re-used for the mesh calculation.
Best regards,
Alexey Pasumansky,
AgiSoft LLC

Dieter

  • Jr. Member
  • **
  • Posts: 56
    • View Profile
Re: Reuse dephmaps
« Reply #2 on: February 21, 2019, 04:47:50 PM »
OK,

thank you!