AsRock AB350 Pro4
Ryzen 7 1700X
Vega 64 sapphire
64gb ram
Win 10 PRO x64
I have random crashes during dense generation. The bigger data set the crash seems to be surer. The screen goes black and PC and I need to hard reset it or the screen turns black and my driver software shows error - Agisoft freeze. Not really often but it happened a few times Metashape gave me "crash report" information. But it happens really rare.
So obviously I was not blaming Metashape. I was sure that this is about my card settings/drivers/wiring etc. I checked everything and I have run the stress test. It is 3 hours when CPU and GPU work on 100%. Everything is perfectly stable. I'm gonna let it works for a few more hours but it seems that the problem is unfortunately Metashape.
Last crash was during depth map generation. No more than 6% of RAM used, GPU and CPU cool. Nothing really spectacular. When I launch GPU operation in Metashape screen starts to flicker a little bit also... I'm stressing my GPU to the max and I haven't seen anything like that. Everything works fine, I have issues with stability only with Metashape. Do you have any idea how to solve this problem? As I'm starting to work with bigger data sets (2k photo +) software seems to be completely unusable for me. I can align photos without any problem, I had never crash during this operation. Of course, I have this strange flickering immediately after GPU starts working. I don't know where should I look for a solution.
Best regards,
Mike