Forum

Author Topic: Add surface constraints  (Read 4870 times)

JRM

  • Jr. Member
  • **
  • Posts: 81
    • View Profile
Add surface constraints
« on: August 09, 2019, 10:07:34 AM »
Several photogrammetry softwares such as Photomesh or ContextCapture offer the possibility to use a a polygon source to add constraints to the mesh reconstruction, this feature is mostly used to flatten water surfaces to avoid geometrical artifacts (ripples, pits, etc.).

This feature is great when dealing with a large project, correcting by hand (deleting and filling back) is too time consuming and could be avoided by the use of pre existant digitized polygons and their elevation data.

JRM

  • Jr. Member
  • **
  • Posts: 81
    • View Profile
Re: Add surface constraints
« Reply #1 on: January 03, 2023, 02:25:26 PM »
Hi,

The DEM editing introduced in Metashape 2.0 is a start but it is limited to only one product (DEM), could it be extended to the 3D Mesh ?

flyzk

  • Jr. Member
  • **
  • Posts: 71
    • View Profile
Re: Add surface constraints
« Reply #2 on: January 03, 2023, 09:43:57 PM »
Hi,

The DEM editing introduced in Metashape 2.0 is a start but it is limited to only one product (DEM), could it be extended to the 3D Mesh ?

I also vote for this feature, it would be super usefull ! (also for tiled mesh)
« Last Edit: January 03, 2023, 09:47:13 PM by flyzk »