More holes in mesh with markers. How can I get rid of small holes in Mesh?

[3DandVR]

In my models I have problems with many small holes in mesh.
I use MS 1.5.5 pro, mesh from depth maps. Quality high and medium and faces at high.

I tried with markers and without.
Without markers and/or medium quality is mesh generation a little bit better. Why?

How can I get rid of small holes in the mesh? Are there tweaks for it?

I tried closing holes in mesh in marked areas but there was an error without explanation.

2019-10-02 20:03:42 Analyzing mesh...
2019-10-02 20:04:03 duplicate faces detected - fixed
2019-10-02 20:04:03 multiple edges detected - fixed
2019-10-02 20:04:04 Finished processing in 21.719 sec (exit code 1)
2019-10-02 20:04:04 total 188 faces removed
2019-10-02 20:04:04 Analyzing mesh...
2019-10-02 20:04:19 Error: multiple edges detected
2019-10-02 20:04:19 Finished processing in 14.891 sec (exit code 0)
2019-10-02 20:04:19 Error: Can't close holes

[SAV]

Hi 3DandVR,

Try TOOLS > MESH > CLOSE HOLES...

All the best.

Regards,
SAV

[3DandVR]

Try TOOLS > MESH > CLOSE HOLES...

This funktion I tried already.
But ist is only for large holes? In my models small holes like in the fense are not closing.

I tried filter marked meshes in this areas but this is also not working.

[SAV]

This tool works for both large and small holes. That's what you can control with the level slider (see attached images).

Regards,
SAV

[Mak11]

What 3DandVR is showing isn't holes. They are tons of singular meshes all over the place because of poor depth map generation. Close holes isn't going to help here.

Mak

[SAV]

For the small holes in 3DandVR's 'no marker mesh' (1st image) it should work.
But I agree, it won't help to fix the isolated/singular meshes that are shown in the 2nd and 3rd image.

Regards,
SAV