Features
Support
Community
Downloads
Buy
About
Forum
Home
Search
Login
Register
Agisoft Metashape
»
Agisoft Metashape
»
General
»
high Error (m) value after finishing the photo alignment (drone mapping)
« previous
next »
Print
Pages: [
1
]
Author
Topic: high Error (m) value after finishing the photo alignment (drone mapping) (Read 2967 times)
csarquiteto
Newbie
Posts: 7
high Error (m) value after finishing the photo alignment (drone mapping)
«
on:
November 16, 2019, 04:46:06 AM »
i am getting high Error (m) value after finishing the photo alignment and i dont know why. I put GCPs correctly... i am starting to think that is the GPS RTK error when collecting point coordinates...
Screenshot attached
Logged
RHenriques
Full Member
Posts: 225
Re: high Error (m) value after finishing the photo alignment (drone mapping)
«
Reply #1 on:
November 16, 2019, 05:50:43 PM »
Deactivate cameras first and then optimize. Cameras are still active and are the reason for the deviation.
Logged
csarquiteto
Newbie
Posts: 7
Re: high Error (m) value after finishing the photo alignment (drone mapping)
«
Reply #2 on:
November 17, 2019, 01:13:51 AM »
Thanks, problems solved.
Logged
Print
Pages: [
1
]
« previous
next »
Agisoft Metashape
»
Agisoft Metashape
»
General
»
high Error (m) value after finishing the photo alignment (drone mapping)
Features
Support
Community
Downloads
Buy
About
Features
Support
Community
Downloads
Buy
About
Metashape presentation
(PDF, 5 Mb)