Fluffiness on the edges

[tristan_bethe]

Hi,

I've recently started experimenting with photoscan and it continues to amaze me how well this works!

But I have a question! I often encounter these kinds of fluffy edges:

http://imageafter.com/temp/tristan/Screenshot.JPG

And here a single shot from the 32 photo's I've made:

http://imageafter.com/temp/tristan/IMG_2828.JPG

And here is the photoscan file.
http://imageafter.com/temp/tristan/garden.zip

What most often causes these errors? I am using the 0.9.1 1654 Beta

I've tried using the gradual selection on te pointcloud to remove some suspect points but it does not seems to make a difference. Also After model creation these fluffies cannot be removed by using gradual selection.

Thanks for any pointers you might have

[Wishgranter]

try use arbitrary mode and smooth settings. object is sharp that a very good. try use masks

 But the art of object is not easy to do, you will need a lot of images.....

[tristan_bethe]

Alright, So more photo's could be a solution, going to try that. Tried the smooth mode but that did not make any difference. Thanks!

[Alexey Pasumansky]

Hello tristan_bethe,

More photos will help if they capture the inner parts of the chair back. Also you can mask the background parts that are visible through the back of the chair.

[tristan_bethe]

Ah yes, masking of course. This was a quick test and was much impressed with the results it gave apart from the artifacts. But if I understand it correctly it is the open faces on the back that have the tendency  to go funky a bit. Makes sense. Thanks Alexey!

[tristan_bethe]

Also I found that setting depth filtering to mild helped in this instance... Guess that is because so much is going on in this example.