Forum

Author Topic: Problem with Alignment Result  (Read 1346 times)

evonflo

  • Newbie
  • *
  • Posts: 2
    • View Profile
Problem with Alignment Result
« on: May 27, 2020, 05:40:44 AM »
Hello there,
I am new member here

I work with Agisoft version 1.5.5 and updated to 1.6.2
I have project for about 5000 ha aerial mapping. In align process it seem good and nothing wrong at all. But after i build orthomosaic and look at result there is some mistake in align process

I attach some pic to show difference between alignment in high setting and medium setting. It show that medium setting is better one than high setting. It show that road in high setting doesnt connect and have some bad alignment, but if i try to align in medium one, it show better result

have you ever experienced some trouble like this? and how to solve it. :(

thanks all


Alexey Pasumansky

  • Agisoft Technical Support
  • Hero Member
  • *****
  • Posts: 14813
    • View Profile
Re: Problem with Alignment Result
« Reply #1 on: May 28, 2020, 01:34:41 AM »
Hello evonflo,

It would be helpful to get the processing reports from both Medium and High runs, as well as the screenshots of the tie point and dense clouds for the problematic areas.
Best regards,
Alexey Pasumansky,
Agisoft LLC

evonflo

  • Newbie
  • *
  • Posts: 2
    • View Profile
Re: Problem with Alignment Result
« Reply #2 on: June 02, 2020, 04:26:36 AM »
Hello evonflo,

It would be helpful to get the processing reports from both Medium and High runs, as well as the screenshots of the tie point and dense clouds for the problematic areas.

Ok Mr Alexey Pasumansky

I actually run this project in one file, so the latest save is in High Alignment.
This is great to check processing report generated from agisoft, and i will show the processing report in high alignment

I found that there are some XY and Z error in my data in camera locations report and it show that the "not connected road" is in the same location with error camera location. But the number of image overlap in that location is pretty good ( 6 - 9 image)

So what do you think about this Sir?

Thanks in advance


report document in this link Sir
https://1drv.ms/b/s!AhUxnxORXYBSgUvN-wQ9Q3Q_HKBO?e=mMg9wf

and screen capt in here
https://ibb.co/ww6bV80
https://ibb.co/x23fVJ6
https://ibb.co/MCxbGVZ