Forum

Author Topic: Export images with applied shapes  (Read 2164 times)

Jaume

  • Newbie
  • *
  • Posts: 25
    • View Profile
Export images with applied shapes
« on: July 24, 2020, 02:11:09 PM »
Dear Agisoft Users,

I wonder If Agisoft has option to export images with drawn shapes on photos. I generated DEM in order to draw polylines on the model to get these shapes on photos (to make visible some CAD lines on photos gathered by UAV). So I need to export photos with these polylines drawn. Shapes become texture and are exported with photos as one image (superimposed textured shapes on photo).

Thank you for any advice in this topic.

dpitman

  • Full Member
  • ***
  • Posts: 198
    • View Profile
Re: Export images with applied shapes
« Reply #1 on: July 24, 2020, 04:03:49 PM »
Right-click on your DSM and select "capture".

Jaume

  • Newbie
  • *
  • Posts: 25
    • View Profile
Re: Export images with applied shapes
« Reply #2 on: July 27, 2020, 10:51:13 AM »
Thank you for your support.
 I know this option but I need something else. I created DSM and I drew polylines on the surface. The thing is that to export photos captured by UAV with this shape on it. After all the polylines have been drawn, I would like to export all the photos with the superimposed shapes automatically. Belowe I put the example:



PROBERT1968

  • Sr. Member
  • ****
  • Posts: 367
  • Hello !
    • View Profile
Re: Export images with applied shapes
« Reply #3 on: July 27, 2020, 03:35:02 PM »
Are you talking about that the red polylines you drew on DSM ?

If it has a georeferenced then you can export it as shapes as a polylines if that is you want.

Just go to File menu -->  Export -->  Export Shapes --->  Select polylines

As for the model, I am not sure about it since I never use it...


Jaume

  • Newbie
  • *
  • Posts: 25
    • View Profile
Re: Export images with applied shapes
« Reply #4 on: July 27, 2020, 06:23:39 PM »
I need to superimpose the drawn shape into the photo so that I can export it as part of the image, not a separate file. There is already a polyline drawn in the image when I open an exported photo (the shape changes to pixels).


PROBERT1968

  • Sr. Member
  • ****
  • Posts: 367
  • Hello !
    • View Profile
Re: Export images with applied shapes
« Reply #5 on: July 27, 2020, 09:20:46 PM »
Ah I see oh okay  I hope they can help you out....

JMR

  • Sr. Member
  • ****
  • Posts: 453
    • View Profile
Re: Export images with applied shapes
« Reply #6 on: July 27, 2020, 10:28:06 PM »
Hi Jaume: why do you wnat shapes rasterized onto individual photos? oe why not onto the orthomosaic? the second is an easy to do task, but superimposing on the photos is kinda dificult. For example keep in mind that a straight line that you draw on the model needs to be distorted (applying radial distortion) to be rasterized onto photos accurately, or a line that is not lying on terrain, will show some offset when reprojected on a photo.