Forum

Author Topic: Weird Orthomosaic reflectance  (Read 281 times)

ArnauCM

  • Newbie
  • *
  • Posts: 28
    • View Profile
Weird Orthomosaic reflectance
« on: September 24, 2020, 06:05:44 PM »
Hello everyone,

I amb having a problem with a project I am working with. We are trying to map a forest plot where there has been different post-fire management operations. To do it, we used a DJI Phantom 3 Adv with a Parrot Sequoia multispectral camera installed.

We designed the flight to map the entire plot at once. We first took the calibration data using a reflectance panel from AIRINOV. Then, we set up the Sequoia (through it's beloved web interface) and then uploaded the flight plan using Map Pilot. It is kind of a big plot, so the dron returned when it had mapped about 50% of the entire surface. As the Sequoia drinks from the drone battery, we first changed the battery, set up the Sequoia again, re-upload the flight plan using Map Pilot, and it automagically resumed the flight from the last known point. So far, so good. It finished the plot with the 2nd battery.

The problem appeared when processing all those images. As you can see in the orthoimage, something happened between the first and the second part of the flight. One part has a lot more brightness or reflectance than the other. The raw images are okay, they are not "burned" so I have hope that something can still be done.

Can anyone help me on this?

Thanks in advance

ArnauCM

  • Newbie
  • *
  • Posts: 28
    • View Profile
Re: Weird Orthomosaic reflectance
« Reply #1 on: October 02, 2020, 05:41:50 PM »
Anyone?  :'(

Alexey Pasumansky

  • Agisoft Technical Support
  • Hero Member
  • *****
  • Posts: 11957
    • View Profile
Re: Weird Orthomosaic reflectance
« Reply #2 on: October 03, 2020, 10:09:03 PM »
Hello ArnauCM,

I can't see the screenshot in your original post, can you re-post it, please?
Best regards,
Alexey Pasumansky,
Agisoft LLC

ArnauCM

  • Newbie
  • *
  • Posts: 28
    • View Profile
Re: Weird Orthomosaic reflectance
« Reply #3 on: October 13, 2020, 11:25:09 AM »
Hello Alexey,

That's weird as I can see it perfectly.

Let me reupload it, then. I lowered the size by 50%. Hope it works now.


ArnauCM

  • Newbie
  • *
  • Posts: 28
    • View Profile
Re: Weird Orthomosaic reflectance
« Reply #4 on: October 20, 2020, 10:12:36 AM »
Well, yesterday I couldn't see the uploads, today I can. It would say it is a forum's bug, as I upload them through it's attachments tool and they randomly decide to appear or not depending on weather.

Anyway, here you have a link https://ibb.co/wMG8P3N

Hope you can see it now, @Alexey

Thank you!

ArnauCM

  • Newbie
  • *
  • Posts: 28
    • View Profile
Re: Weird Orthomosaic reflectance
« Reply #5 on: October 26, 2020, 07:49:58 PM »
Please...

PD: You have to be logged on to see the screenshots