Generating depth maps stucks

[gismoe]

I'am tyring to generate a depth mesh. But after this weekend it seems that the process stucks. cpu usage of metashape is 0%. These are the last entries in the log:

Code: [Select]

Generating depth maps..
...
Marching cubes: part #24/26...
16/32 mini parts used per pass (16241 MB target memory)
Data preloaded in 16.576 s (1441 MB -> 6002 MB, 362.096 MB/s)
Data preloaded in 21.77 s (1727 MB -> 7088 MB, 325.615 MB/s)
cubes part marched in 32 mini parts: 2.66867e+06 avg cubes -> 719741 avg faces -> 106277 avg decimated faces = avg ratio x6.7723, done in 130.292 s (21% cubes IO + 2% sorting + 22% marching + 55% decimating + 0% saving)
Marching cubes: part #25/26...
16/32 mini parts used per pass (16241 MB target memory)
Data preloaded in 11.95 s (1044 MB -> 4334 MB, 362.734 MB/s)
Data preloaded in 15.121 s (1044 MB -> 4334 MB, 286.666 MB/s)
cubes part marched in 32 mini parts: 1.17189e+06 avg cubes -> 465309 avg faces -> 41803.9 avg decimated faces = avg ratio x11.1308, done in 84.729 s (22% cubes IO + 2% sorting + 20% marching + 57% decimating + 0% saving)
Marching cubes: part #26/26...
16/32 mini parts used per pass (16241 MB target memory)
Data preloaded in 8.031 s (400 MB -> 1775 MB, 221.033 MB/s)
cubes part marched in 6 mini parts: 514452 avg cubes -> 223944 avg faces -> 32335 avg decimated faces = avg ratio x6.92575, done in 18.725 s (18% cubes IO + 1% sorting + 19% marching + 61% decimating + 0% saving)
Finalizing mesh...

Peak memory used: 20.36 GB at 2021-05-22 20:41:22


Any suggestions?