Forum

Author Topic: Differance in point cloud from old Agisoft and Metrashape  (Read 2632 times)

Invaidor

  • Newbie
  • *
  • Posts: 22
    • View Profile
Differance in point cloud from old Agisoft and Metrashape
« on: February 26, 2021, 12:11:18 PM »
Hi

I noticed an differance in point cloud from old Agisoft and new metashape.
Im creating point clowk over an low forest area <5meters height of trees, and the tops of trees gets shopped off/rounded in metashape.
I'm running the same settings, well there arent that many settings to choose from more thatn qualety and filtering.
I have run both in meduim and mild.

Metashape produced a whole lot less noice than old agisoft witch is good.

Any ideas? Whats should I do differant?

Allign photos, medium, reference, Key 40'000, Tie 4000. Photo accuracy 0,1meter.
Optimize cameras
Build dense clud, medium quality, mild depth filtering.

I get differant output with lower height on trees in Metashape.

Invaidor

  • Newbie
  • *
  • Posts: 22
    • View Profile
Re: Differance in point cloud from old Agisoft and Metrashape
« Reply #1 on: March 02, 2021, 11:01:03 AM »
See the differance with the same settings in all steps on both versions.

MaciekK

  • Newbie
  • *
  • Posts: 25
    • View Profile
Re: Differance in point cloud from old Agisoft and Metrashape
« Reply #2 on: March 02, 2021, 11:06:52 AM »
you have 15 million points on one cloud and 101 million on the other - maybe that's the difference

Invaidor

  • Newbie
  • *
  • Posts: 22
    • View Profile
Re: Differance in point cloud from old Agisoft and Metrashape
« Reply #3 on: March 02, 2021, 02:08:01 PM »
I have tryed all different qualety settings in Metashape, non of them look like Agisoft dence cloud.

Alexandros21

  • Newbie
  • *
  • Posts: 9
    • View Profile
Re: Differance in point cloud from old Agisoft and Metrashape
« Reply #4 on: March 02, 2021, 02:39:10 PM »
The difference in points count is huge. Are you sure you didn't use high quality settings in the old Agisoft? Also, which version is the old Agisoft and which the Metashape that you tried?

Invaidor

  • Newbie
  • *
  • Posts: 22
    • View Profile
Re: Differance in point cloud from old Agisoft and Metrashape
« Reply #5 on: March 02, 2021, 03:17:58 PM »
Nope same settings in both..
The Agisoft version was Agisoft 1.2 and Metshape 1.7.

Alexey Pasumansky

  • Agisoft Technical Support
  • Hero Member
  • *****
  • Posts: 14813
    • View Profile
Re: Differance in point cloud from old Agisoft and Metrashape
« Reply #6 on: March 03, 2021, 07:05:15 PM »
Hello Invaidor,

If possible, please share the original image set that you are using for this project (or any other project where the difference is considerable) to support@agisoft.com, so that we could reproduce the difference and investigate the source of it. Additionally please share the PDF reports exported from both projects.
Best regards,
Alexey Pasumansky,
Agisoft LLC

Invaidor

  • Newbie
  • *
  • Posts: 22
    • View Profile
Re: Differance in point cloud from old Agisoft and Metrashape
« Reply #7 on: March 05, 2021, 02:07:53 PM »
Yes an email with the related data is sent to support adress.

Invaidor

  • Newbie
  • *
  • Posts: 22
    • View Profile
Re: Differance in point cloud from old Agisoft and Metrashape
« Reply #8 on: September 13, 2022, 02:22:11 PM »
@Alexey Pasumansky, do you have any news in this issue?