Forum

Author Topic: Problem with support of Mavic Pro 2 Hassemblad Camera  (Read 1657 times)

AndreaR70

  • Newbie
  • *
  • Posts: 7
    • View Profile
Problem with support of Mavic Pro 2 Hassemblad Camera
« on: June 02, 2021, 12:21:18 PM »
Hello,

When I load a set of photos of the Mavic pro 2 Hassemblad (camera model L1D-20c) Metashape racognize the camera model as Test_Pro whithout calibration parameters! Is normal?

Thanks

Andrea

Paulo

  • Hero Member
  • *****
  • Posts: 776
    • View Profile
Re: Problem with support of Mavic Pro 2 Hassemblad Camera
« Reply #1 on: June 02, 2021, 12:59:07 PM »
Hello Andrea,

only the model name seems changed from regular LDC-20c but pixel size (0.00241 mm) and focal (10.26 mm) are correct so I would not worry.

If you share one example image we could always check the Exif data to see why name has changed....
« Last Edit: June 02, 2021, 01:00:58 PM by Paulo »
Best Regards,

Paul Pelletier

Alexey Pasumansky

  • Agisoft Technical Support
  • Hero Member
  • *****
  • Posts: 13211
    • View Profile
Re: Problem with support of Mavic Pro 2 Hassemblad Camera
« Reply #2 on: June 02, 2021, 01:09:14 PM »
Hello Andrea,

"Test_Pro" is the camera name that is recorded in XMP of the images from this camera. In Metashape XMP has priority over EXIF data.

It seems to be an issue of DJI firmware, so if you have any contact in DJI, you can let them know, that the camera name is incorrectly kept in XMP meta data.

I've seen recently similar problems for this camera/drone coming from other users.
Best regards,
Alexey Pasumansky,
Agisoft LLC