Forum

Author Topic: Case study of using full spherical 360° images in Agisoft Metashape  (Read 3273 times)

ChristianeZhao

  • Newbie
  • *
  • Posts: 15
    • View Profile
    • Chistiane's LinkedIn

It is my great pleasure to share with my Community that my case study of "using full spherical 360° images in Agisoft Metashape" is now published by #agisoft in their community, under the #topography & #mapping section.

Check out the Agisoft article page here: https://lnkd.in/gneciFG
You can also directly read the article here: https://projects.weiss-ag.com/Weiss_AG_Case_study_of_using_full_spherical_360_images_in_Agisoft_Metashape.pdf
If you are a user of Civetta, feel free to contact me directly and I am more than happy to turn your story into papers.

Feel free to follow me and interact with me in LinkedIn: https://www.linkedin.com/in/christiane-zhao-a073b4130/

Paulo

  • Hero Member
  • *****
  • Posts: 1350
    • View Profile
Christiane,

Very informativ article, Thank you!

It would be great if you could share a small data set of Civetta 360 images (maybe some from the temple including a few drone dJI images) so that we can have a look at its potential when processing  with Metashape...
« Last Edit: April 16, 2021, 09:50:35 PM by Paulo »
Best Regards,
Paul Pelletier,
Surveyor

cbnewham

  • Full Member
  • ***
  • Posts: 121
    • View Profile
Very good!

SebastianStumpf

  • Newbie
  • *
  • Posts: 9
    • View Profile
Re: Case study of using full spherical 360° images in Agisoft Metashape
« Reply #3 on: October 02, 2023, 11:48:05 AM »
Christiane,

unfortunately, the link that you shared is behind a Weiss-Login-Wall, and is not accessible by the public. I'm referring to this link: https://projects.weiss-ag.com/Weiss_AG_Case_study_of_using_full_spherical_360_images_in_Agisoft_Metashape.pdf

Could you please upload in a public location? Thanks!

cyrilp

  • Jr. Member
  • **
  • Posts: 85
    • View Profile
Re: Case study of using full spherical 360° images in Agisoft Metashape
« Reply #4 on: October 06, 2023, 04:41:49 PM »
Christiane,

unfortunately, the link that you shared is behind a Weiss-Login-Wall, and is not accessible by the public. I'm referring to this link: https://projects.weiss-ag.com/Weiss_AG_Case_study_of_using_full_spherical_360_images_in_Agisoft_Metashape.pdf

Could you please upload in a public location? Thanks!

+1

Alexey Pasumansky

  • Agisoft Technical Support
  • Hero Member
  • *****
  • Posts: 14965
    • View Profile
Re: Case study of using full spherical 360° images in Agisoft Metashape
« Reply #5 on: October 10, 2023, 12:34:33 PM »
Cyril, Sebastian,

here is the link to web-version of the same article: https://weiss-ag.com/civetta-agisoft-metashape-application-note/
Best regards,
Alexey Pasumansky,
Agisoft LLC