Forum

Author Topic: Convert whether K4 is enabled for the InPHO project  (Read 690 times)

ruyi7952

  • Full Member
  • ***
  • Posts: 103
    • View Profile
    • My Blog
Convert whether K4 is enabled for the InPHO project
« on: October 30, 2021, 07:55:56 PM »
This issue has been raised for a long time, PhotoScan conversion to inpho project distortion coefficient is wrong.

It was not taken seriously by official engineers

Why is that?

I further verified this problem.

If it is an aerial camera with small distortion coefficient, At this time, K4 distortion coefficient will not be introduced.PhotoScan conversion results work normally. For example, leica, Feisi and other professional equipment.

However, PhotoScan will automatically reference the K4 distortion coefficient for devices with large distortion coefficient, and the result is wrong.

This has been a problem for years.

Real Scene Model Professional Contractor

Collect、Process、Publish