Forum

Author Topic: GPU 2  (Read 1061 times)

Vladimir Denisov

  • Jr. Member
  • **
  • Posts: 79
    • View Profile
GPU 2
« on: January 21, 2022, 04:38:21 PM »
Whats is GPU2? I have only one gpu.

Code: [Select]
[GPU 1] group 1/1: estimating depth map for 10/11 camera 5574 (16 neighbs) ...
[GPU 2] Camera 5573 samples after final filtering: 17% (3.72683 avg inliers) = 100% - 0% ....
[GPU 2] Camera 5573 tile #4/4: level #6/6 (x1 downscale: 2048x1560) done in 2.643 s = 4. ...
[GPU 1] Camera 5574 samples after final filtering: 17% (3.91162 avg inliers) = 100% - 1% ....
[GPU 1] Camera 5574 tile #1/4: level #6/6 (x1 downscale: 2048x1536) done in 2.181 s = 4....
[GPU 2] group 1/1: estimating depth map for 11/11 camera 5575 (5 neighbs) ...
[GPU 1] Camera 5574 samples after final filtering: 11% (3.42611 avg inliers) = 100% - 5% ....

Alexey Pasumansky

  • Agisoft Technical Support
  • Hero Member
  • *****
  • Posts: 14816
    • View Profile
Re: GPU 2
« Reply #1 on: January 21, 2022, 04:51:34 PM »
Hello Vladimir,

If in the beginning of the log (during the GPU initialization) you see something similar to "Using device 'Quadro P6000' in concurrent. (2 times)" - that would be a reason of two pseudo-devices in the further log. One card is used twice.
So if you have two GPUs and each one is used twice, you'll get GPU 1 - GPU 4 in the log.
Best regards,
Alexey Pasumansky,
Agisoft LLC