Forum

Author Topic: AprilTag  (Read 2441 times)

ferengi

  • Newbie
  • *
  • Posts: 9
    • View Profile
AprilTag
« on: April 14, 2022, 01:55:36 PM »
hi,

would be nice if metashape support AprilTags

https://github.com/AprilRobotics/apriltag

Lazar Obradovic

  • Newbie
  • *
  • Posts: 7
    • View Profile
Re: AprilTag
« Reply #1 on: April 19, 2022, 01:15:33 PM »
+1

Hugh

  • Newbie
  • *
  • Posts: 19
    • View Profile
Re: AprilTag
« Reply #2 on: April 23, 2022, 07:54:53 PM »
+1

forumname

  • Newbie
  • *
  • Posts: 21
    • View Profile
Re: AprilTag
« Reply #3 on: May 20, 2022, 03:51:09 PM »
Bumping this request as probably one of the most important feature updates. ChArUco would be welcome as well.

hopkuh

  • Newbie
  • *
  • Posts: 1
    • View Profile
Re: AprilTag
« Reply #4 on: September 09, 2022, 10:19:02 PM »
+1

Kjellis85

  • Full Member
  • ***
  • Posts: 220
  • Archaeological field supervisor
    • View Profile
    • Contact information at University of Tromsø
Re: AprilTag
« Reply #5 on: November 10, 2022, 10:33:18 AM »
+1

ilia

  • Newbie
  • *
  • Posts: 22
    • View Profile
Re: AprilTag
« Reply #6 on: November 21, 2022, 02:59:19 PM »
+1 for sure

ilia

  • Newbie
  • *
  • Posts: 22
    • View Profile
Re: AprilTag
« Reply #7 on: November 22, 2022, 06:44:38 PM »
But wait. As far as I know Metashape supports ArUco markers. And some of them are compatible with some AprilTags families.
Would be nice if Metashape will support calibration through AplirGrids which is more suitable for calibration and you don't need to fit the whole grid into image.

3create

  • Newbie
  • *
  • Posts: 26
    • View Profile
    • 3create
Re: AprilTag
« Reply #8 on: November 25, 2022, 09:33:21 AM »
+1 | would be really useful!