Good Day, can anyone help me.
The readings of another surveyor using RTK device on an area vs my readings of the contour from my Phantom 4 RTK is heavily different on the flat areas.
The coastline is the same at 2 meters, but on the other flat areas the rtk device is also 2 meters but on the p4r process is at 10 meters. I classified ground points at
Max angle: 45 deg
Max distance: 1
Cell size: 50
Erosion radius: 0.5
The area that is surveyed has both flat and mountain forests.
Am i doing something wrong with the classification or the other surveyor is wrong. Thank you for your feedbacks.