Forum

Author Topic: Agisoft Metashape 2.0.0 pre-release  (Read 40369 times)

RHenriques

  • Full Member
  • ***
  • Posts: 225
    • View Profile
Re: Agisoft Metashape 2.0.0 pre-release
« Reply #75 on: December 15, 2022, 09:10:56 PM »
Thank you Alexey for the details.
As a matter of fact, in further tests, this last version works better than version 1.8.4, particularly in bigger projects. Processing times in version 2 are now slightly better that they were in version 1.8.4 consistently.
Great work!
Best regards


« Last Edit: December 16, 2022, 05:21:33 PM by RHenriques »

BetaTest

  • Newbie
  • *
  • Posts: 8
    • View Profile
Re: Agisoft Metashape 2.0.0 pre-release
« Reply #76 on: December 27, 2022, 01:10:17 AM »
I've noticed something strange in v2.0 beta (I've updated to the latest Dec 25th release and the problem remains).

In both 1.8.5 and 2.0 I have enabled the option:
Preferences > Advanced > Load camera orientation angles from XMP metadata

In 1.8.5 this loads Yaw, Pitch, Roll from the XMP metadata.

In 2.0 this only loads Yaw.  Pitch and Roll are always 0 (zero).

It's strange that it does load Pitch, but not the other two.

Thank you.
« Last Edit: December 27, 2022, 01:28:56 AM by BetaTest »

RHenriques

  • Full Member
  • ***
  • Posts: 225
    • View Profile
Re: Agisoft Metashape 2.0.0 pre-release
« Reply #77 on: December 27, 2022, 02:24:36 AM »
This last beta does not assume the previous version 2.0 license. If we reenter the serial number it gives an error.
Is there a workaround?
Best regards

Alexey Pasumansky

  • Agisoft Technical Support
  • Hero Member
  • *****
  • Posts: 14817
    • View Profile
Re: Agisoft Metashape 2.0.0 pre-release
« Reply #78 on: December 27, 2022, 01:07:52 PM »
Hello Renato,

Can you please specify the error message that you are observing during the activation?
Best regards,
Alexey Pasumansky,
Agisoft LLC

Alexey Pasumansky

  • Agisoft Technical Support
  • Hero Member
  • *****
  • Posts: 14817
    • View Profile
Re: Agisoft Metashape 2.0.0 pre-release
« Reply #79 on: December 27, 2022, 01:10:54 PM »
I've noticed something strange in v2.0 beta (I've updated to the latest Dec 25th release and the problem remains).

In both 1.8.5 and 2.0 I have enabled the option:
Preferences > Advanced > Load camera orientation angles from XMP metadata

In 1.8.5 this loads Yaw, Pitch, Roll from the XMP metadata.

In 2.0 this only loads Yaw.  Pitch and Roll are always 0 (zero).

It's strange that it does load Pitch, but not the other two.
Hello!

Can you please specify, images from what camera/drone you are using?
Best regards,
Alexey Pasumansky,
Agisoft LLC

RHenriques

  • Full Member
  • ***
  • Posts: 225
    • View Profile
Re: Agisoft Metashape 2.0.0 pre-release
« Reply #80 on: December 27, 2022, 09:15:21 PM »
Hello Renato,

Can you please specify the error message that you are observing during the activation?

Hi Alexey

After opening this latest beta, the message in attachment appears. After entering the serial number or activate via terminal, the result is the same, even if "Activation successful" message appears in the terminal. After, the second message in attachment appears (asking to contact your support).
Best regards


PS: Reinstalled previous last beta (15522) and it's working fine, without asking for the license.
« Last Edit: December 27, 2022, 09:22:22 PM by RHenriques »

Alexey Pasumansky

  • Agisoft Technical Support
  • Hero Member
  • *****
  • Posts: 14817
    • View Profile
Re: Agisoft Metashape 2.0.0 pre-release
« Reply #81 on: December 28, 2022, 12:22:23 PM »
Hello Renato,

There were some issues with the security protocols in the latest pre-release (for macOS) that will be fixed in the next update. It should be possible to workaround the issue by manual OpenSSL installation, but it may be better just to wait a couple of days till the update.
Best regards,
Alexey Pasumansky,
Agisoft LLC

Alexey Pasumansky

  • Agisoft Technical Support
  • Hero Member
  • *****
  • Posts: 14817
    • View Profile
Re: Agisoft Metashape 2.0.0 pre-release
« Reply #82 on: December 28, 2022, 05:20:25 PM »
Pre-release build updated, so the activation issues on macOS should be resolved now.
Best regards,
Alexey Pasumansky,
Agisoft LLC

RHenriques

  • Full Member
  • ***
  • Posts: 225
    • View Profile
Re: Agisoft Metashape 2.0.0 pre-release
« Reply #83 on: December 28, 2022, 08:44:43 PM »
Pre-release build updated, so the activation issues on macOS should be resolved now.

Hi Alexey

Confirmed! Everything is working as expected now.
Best Regards

sergio

  • Newbie
  • *
  • Posts: 17
    • View Profile
Re: Agisoft Metashape 2.0.0 pre-release
« Reply #84 on: January 12, 2023, 02:38:00 PM »
Please add links to older versions!!

We installed 2.0 and it broke our workflow scripts. There are no link to older installers (we use both 1.8.4 API and GUI).

Alexey Pasumansky

  • Agisoft Technical Support
  • Hero Member
  • *****
  • Posts: 14817
    • View Profile
Re: Agisoft Metashape 2.0.0 pre-release
« Reply #85 on: January 12, 2023, 05:51:40 PM »
Please add links to older versions!!
Download links for the previous major version is usually available on the Downloads page:
https://www.agisoft.com/downloads/installer/
Best regards,
Alexey Pasumansky,
Agisoft LLC

bassistas

  • Newbie
  • *
  • Posts: 41
    • View Profile
Re: Agisoft Metashape 2.0.0 pre-release
« Reply #86 on: January 15, 2023, 06:38:19 AM »
Hello, I have imported some laser scans using the new option but as some of them don't contain colour and only intensity Metashape doesn't show any image from these (in grayscale) so I can't add any markers to improve the alignment of the photos from the camera.  Is there any solution to this?

Snikkern

  • Newbie
  • *
  • Posts: 4
    • View Profile
Re: Agisoft Metashape 2.0.0 pre-release
« Reply #87 on: January 16, 2023, 01:10:39 AM »
Doesnt the cloud processing work with 2.0 ?

Alexey Pasumansky

  • Agisoft Technical Support
  • Hero Member
  • *****
  • Posts: 14817
    • View Profile
Re: Agisoft Metashape 2.0.0 pre-release
« Reply #88 on: January 16, 2023, 01:17:38 PM »
Hello, I have imported some laser scans using the new option but as some of them don't contain colour and only intensity Metashape doesn't show any image from these (in grayscale) so I can't add any markers to improve the alignment of the photos from the camera.  Is there any solution to this?

Hello bassistas,

Thank you for reporting. The issue will be fixed in 2.0.1 update and it would be possible to use uncolored laser scans for intensity-based alignment.
Best regards,
Alexey Pasumansky,
Agisoft LLC

Alexey Pasumansky

  • Agisoft Technical Support
  • Hero Member
  • *****
  • Posts: 14817
    • View Profile
Re: Agisoft Metashape 2.0.0 pre-release
« Reply #89 on: January 16, 2023, 01:23:18 PM »
Doesnt the cloud processing work with 2.0 ?

Hello Snikkern,

Currently Agisoft Cloud has not been yet updated to 2.0 version, so it allows to start the processing tasks using Metashape Pro 1.8 only. But we are planning to update it to 2.0 version in the nearest future.
Best regards,
Alexey Pasumansky,
Agisoft LLC