Author Topic: GUI and API Red-edge and Blue pixel values different  (Read 3641 times)


  • Newbie
  • *
  • Posts: 10
    • View Profile
GUI and API Red-edge and Blue pixel values different
« on: October 12, 2023, 11:04:35 PM »
I am testing the results of GUI vs API processing of Micasense imagery. I use different shapefiles placed over the image to compare the pixel values of each band (using raster zonal stats). There are 5 bands: blue, green, red, red-edge, and nir.
The green and red orthomosaic results are great and the pixel averages for the shapefiles match well, the red-edge is also okay.
The issue is that the orthomosaic blue and nir pixels values are quite different for the shapefile areas. I manually set the whiteboard albedo in both the GUI and API {"Blue": "0.66", "Green": "0.67", "Red": "0.67", "NIR": "0.67", "Red edge": "0.63"}. Is there any other possibility of why this might be happening? Here is the code used for this step:

albedo = {"Green": "0.67", "Red": "0.67", "NIR": "0.63", "Red edge": "0.67"}

for camera in chunk.cameras:
    if and == "Calibration images":
        for plane in camera.planes:
            plane.meta["ReflectancePanel/Calibration"] = albedo[plane.sensor.bands[0]]

for sensor in chunk.sensors:
    sensor.normalize_sensitivity = True

task = Metashape.Tasks.CalibrateReflectance()
task.use_reflectance_panels = True
task.use_sun_sensor = True

for sensor in chunk.sensors:

chunk.calibrateReflectance(use_reflectance_panels=True, use_sun_sensor=True)

Thanks in advance!
- Robin
« Last Edit: October 24, 2023, 09:15:16 PM by rkwik »


  • Newbie
  • *
  • Posts: 10
    • View Profile
Re: GUI and API NIR and Blue pixel values different
« Reply #1 on: October 24, 2023, 09:14:00 PM »
Forgot to add the Blue into the albedo dictionary, sorry.
albedo = {"Blue":"0.66","Green": "0.67", "Red": "0.67", "NIR": "0.63", "Red edge": "0.67"}

I also realized that it is the blue and red-edge bands, not the nir.