Features
Support
Community
Downloads
Buy
About
Forum
Home
Search
Login
Register
Agisoft Metashape
»
Agisoft Metashape
»
Feature Requests
»
Use elevation for Y value in Planar mosaic world file.
« previous
next »
Print
Pages: [
1
]
Author
Topic: Use elevation for Y value in Planar mosaic world file. (Read 5642 times)
bisenberger
Sr. Member
Posts: 329
Use elevation for Y value in Planar mosaic world file.
«
on:
October 27, 2023, 04:50:05 AM »
It would be very useful if the elevation was used for the Y value in Planar mosaic world files.
These are excavation profiles in Global Mapper:
«
Last Edit: October 28, 2023, 07:09:27 PM by bisenberger
»
Logged
Digital Mapping & Graphics LLC
https://digital-mapping.net/
bisenberger
Sr. Member
Posts: 329
Re: Use elevation for Y value in Planar mosaic world file.
«
Reply #1 on:
November 29, 2023, 05:28:54 PM »
This feature was actually in earlier versions of Photoscan. Here is a link to a Photoscan project file from 2017 that contains a planar ortho with local coordinates.
https://digital-mapping.net/metashape/Photoscan_2017_ortho_with_local_coordinates.zip
When you view the ortho in Metashape, you can see the local coordinates for the planar profile displayed in the bottom right corner of the program window.
If you export the planar ortho with a world file, the world file also contain the local coordinates for the planar projection.
Logged
Digital Mapping & Graphics LLC
https://digital-mapping.net/
Print
Pages: [
1
]
« previous
next »
Agisoft Metashape
»
Agisoft Metashape
»
Feature Requests
»
Use elevation for Y value in Planar mosaic world file.
Features
Support
Community
Downloads
Buy
About
Features
Support
Community
Downloads
Buy
About
Metashape presentation
(PDF, 5 Mb)