Generating Block Model from Depth + Laser Scans

[jhead]

I'm getting the following error whilst generating a Block Model from a depth + laser scan solution in Metashape Pro version 2.2.0 build 19522. This is occurring in the estimating resolution stage (~80%)

Code: [Select]

Marching cubes: part #4/58...
Warning: Can't open file: too many files open (24): C:/Project Work/_Photogrammetry/SPWI0391_W0001/2024Nov_Crotty Dam and Intake.files/5/0/block_model.tmp/model.tmp/leaves/hists/2/145.hist: attempt 1/10
Warning: Can't open file: too many files open (24): C:/Project Work/_Photogrammetry/SPWI0391_W0001/2024Nov_Crotty Dam and Intake.files/5/0/block_model.tmp/model.tmp/leaves/hists/2/145.hist: attempt 2/10
Warning: Can't open file: too many files open (24): C:/Project Work/_Photogrammetry/SPWI0391_W0001/2024Nov_Crotty Dam and Intake.files/5/0/block_model.tmp/model.tmp/leaves/hists/2/145.hist: attempt 3/10
Warning: Can't open file: too many files open (24): C:/Project Work/_Photogrammetry/SPWI0391_W0001/2024Nov_Crotty Dam and Intake.files/5/0/block_model.tmp/model.tmp/leaves/hists/2/145.hist: attempt 4/10
Warning: Can't open file: too many files open (24): C:/Project Work/_Photogrammetry/SPWI0391_W0001/2024Nov_Crotty Dam and Intake.files/5/0/block_model.tmp/model.tmp/leaves/hists/2/145.hist: attempt 5/10
Warning: Can't open file: too many files open (24): C:/Project Work/_Photogrammetry/SPWI0391_W0001/2024Nov_Crotty Dam and Intake.files/5/0/block_model.tmp/model.tmp/leaves/hists/2/145.hist: attempt 6/10
Warning: Can't open file: too many files open (24): C:/Project Work/_Photogrammetry/SPWI0391_W0001/2024Nov_Crotty Dam and Intake.files/5/0/block_model.tmp/model.tmp/leaves/hists/2/145.hist: attempt 7/10

[vineg]

Hi!

You could try to increase maximum open files limit according to https://askubuntu.com/questions/1182021/too-many-open-files

Full processing log could help to determine the problem.

Regards, Egor

[Alexey Pasumansky]

Hello jhead,

Yes, please share the complete processing log corresponding to the model generation to support@agisoft.com. Additionally please provide PDF report exported from the related project and specify the number of laser scans used in the project and total number of points in those scans.

Also might be helpful to know the version of Windows used and model of SSD/HDD that is used to store the project.files.