markers not appearing on scanned mesh

[hanscastrop1@gmail.com]

Hi
I've imported a scanned mesh in a separate chunk. I create markers on the surface but no markers can be seen. They appear in the chunk but not on mesh. How can I solve this? (obviously I can't put markers on photographes)

Regards
Hans

[Duringar]

Hello Hans,

I see two possible fixes:

• is the Coordinate Reference System the same for the chunk and the mesh?
• Have you checked the "show Markers"-Button from the toolbar?

Hope that helps!

[Alexey Pasumansky]

Hello Hans,

What task you are planning to solve by placing the markers on the imported model?

If you see any reasonable values on the Source values tab of the Reference pane for those markers, then you can check them on in the Reference pane in order to see them in the Model view.

[hanscastrop1@gmail.com]

Hello,
sorry for the late reaction;
the purpose is to align the scanned mesh with the photogrammetry mesh so I can put the texture from photogrammetry on it.

Thanks.
Hans.

[Alexey Pasumansky]

Hello Hans,

Then maybe you should try align-model-to-model script instead:
https://github.com/agisoft-llc/metashape-scripts/blob/master/src/align_model_to_model.py

Currently it is not possible to put a marker projection on the mesh model, as it could be done for the imported laser scanning point cloud.

[hanscastrop1@gmail.com]

Great,

Thanks Alexey!

Hans.