Forum

Author Topic: Agisoft PhotoScan 0.8.3 pre-release  (Read 27896 times)

Alexey Pasumansky

  • Agisoft Technical Support
  • Hero Member
  • *****
  • Posts: 12940
    • View Profile
Agisoft PhotoScan 0.8.3 pre-release
« on: July 27, 2011, 07:46:38 PM »
Pre-release version of Agisoft PhotoScan 0.8.3 is available for download.

This pre-release is considered as unstable and is not recommended for production use.

Please let us know if you have any problems using this version.

Please post problems and/or questions concerning other PhotoScan version in separate topics.

This topic will be removed when the final 0.8.3 version is released.

EDIT:
Updated to 0.8.3 build 1154

EDIT:
Updated to 0.8.3 build 1214

EDIT:
PhotoScan 0.8.3 build 1224 was finally released. Thank you for useful feedback.

Please use the links on the main PhotoScan pages for download:
Agisoft PhotoScan Standard edition
Agisoft PhotoScan Professional edition
« Last Edit: September 18, 2011, 04:50:04 PM by admin »
Best regards,
Alexey Pasumansky,
Agisoft LLC

IanJohnson

  • Newbie
  • *
  • Posts: 32
    • View Profile
Re: Agisoft PhotoScan 0.8.3 pre-release
« Reply #1 on: July 29, 2011, 05:58:49 AM »
Is there a change log for this pre-release?

I've seen the progress screen in the batch window, and appreciate the addition.

Diego

  • Full Member
  • ***
  • Posts: 167
    • View Profile
Re: Agisoft PhotoScan 0.8.3 pre-release
« Reply #2 on: July 29, 2011, 01:59:14 PM »
Change Log?

Regards,

Diego

Alexey Pasumansky

  • Agisoft Technical Support
  • Hero Member
  • *****
  • Posts: 12940
    • View Profile
Re: Agisoft PhotoScan 0.8.3 pre-release
« Reply #3 on: August 01, 2011, 06:23:27 PM »
Hello,

We have updated Change Log.
Best regards,
Alexey Pasumansky,
Agisoft LLC

wj

  • Newbie
  • *
  • Posts: 19
    • View Profile
Re: Agisoft PhotoScan 0.8.3 pre-release
« Reply #4 on: August 05, 2011, 05:03:49 PM »
This version of the texture mapping function more slowly than the 877 version (Generic? :(

Alexey Pasumansky

  • Agisoft Technical Support
  • Hero Member
  • *****
  • Posts: 12940
    • View Profile
Re: Agisoft PhotoScan 0.8.3 pre-release
« Reply #5 on: August 05, 2011, 05:09:12 PM »
Hello wj,

The speed of texture reconstruction should be the same.  Do you experience real difference?
Best regards,
Alexey Pasumansky,
Agisoft LLC

wj

  • Newbie
  • *
  • Posts: 19
    • View Profile
Re: Agisoft PhotoScan 0.8.3 pre-release
« Reply #6 on: August 08, 2011, 03:31:19 PM »
yes,I did the experiment, using the same photo, the speed is very slow (36 photos need 3 hours textrue)

but 877 need 10 minutes

Alexey Pasumansky

  • Agisoft Technical Support
  • Hero Member
  • *****
  • Posts: 12940
    • View Profile
Re: Agisoft PhotoScan 0.8.3 pre-release
« Reply #7 on: August 08, 2011, 03:52:39 PM »
Hello wj,

Could you please check texture reconstruction in 0.8.3 is using the same parameters as in build 877.
If you were using "Orthophoto" in 877 please check it is the same in 0.8.3 because PhotoScan sets mapping mode to "Generic" by default.
"Orthophoto" is much faster then "Generic" especially on meshes with millions of faces.


Best regards,
Alexey Pasumansky,
Agisoft LLC

wj

  • Newbie
  • *
  • Posts: 19
    • View Profile
Re: Agisoft PhotoScan 0.8.3 pre-release
« Reply #8 on: August 08, 2011, 04:45:17 PM »
I will check later, and another question, how to make the texture more sharpness, brightness uniformity? Which way should I use?
I currently use the way: maping mode--- gneneric              blending mode--- Max intensity
 

Alexey Pasumansky

  • Agisoft Technical Support
  • Hero Member
  • *****
  • Posts: 12940
    • View Profile
Re: Agisoft PhotoScan 0.8.3 pre-release
« Reply #9 on: August 08, 2011, 04:58:38 PM »
Hello wj,

You can try "Mosaic" blending mode but for the "Generic" parametrization there could be visible seams on the objects surface.

And concerning your previous question, if you have project built in 0.8.1.877 to compare with you can find parameters used by right-clicking on chunk in Workspace pane and selection "Show info".
Best regards,
Alexey Pasumansky,
Agisoft LLC

wj

  • Newbie
  • *
  • Posts: 19
    • View Profile
Re: Agisoft PhotoScan 0.8.3 pre-release
« Reply #10 on: August 09, 2011, 12:45:33 PM »
This version--- Quality of Merged Chunks still not good, low quality, detail is lost.

wj

  • Newbie
  • *
  • Posts: 19
    • View Profile
Re: Agisoft PhotoScan 0.8.3 pre-release
« Reply #11 on: August 10, 2011, 01:10:51 PM »

Alexey Pasumansky

  • Agisoft Technical Support
  • Hero Member
  • *****
  • Posts: 12940
    • View Profile
Re: Agisoft PhotoScan 0.8.3 pre-release
« Reply #12 on: August 10, 2011, 01:46:33 PM »
Hello wj,

Are you using "Generic" mapping mode in the case, shown on screenshot? How long did it take to pass "Parametrization" stage? And what are atlas parameters?

Building texture stage consists of two steps - parametrization and blending. If you have different processing time on this stage - then it is likely you've used different mapping mode in the old version.

Texture blending is done quite fast unless entered atlas parameters are too big for RAM and uses swap. If the parametrization stage is done fast in your case please try to decrease texture atlas width and height (in Task Monitor you can watch the memory usage).
Best regards,
Alexey Pasumansky,
Agisoft LLC

wj

  • Newbie
  • *
  • Posts: 19
    • View Profile
Re: Agisoft PhotoScan 0.8.3 pre-release
« Reply #13 on: August 10, 2011, 02:47:45 PM »




Alexey Pasumansky

  • Agisoft Technical Support
  • Hero Member
  • *****
  • Posts: 12940
    • View Profile
Re: Agisoft PhotoScan 0.8.3 pre-release
« Reply #14 on: August 10, 2011, 02:53:13 PM »
Hello wj,

Could you please try to set texture atlas 20000x20000 and check if blending stage quickens.
Best regards,
Alexey Pasumansky,
Agisoft LLC