Selling my 77DSLR Photogrammetry Rig

[3dify]

Primarily due to losing our studio space in Brighton, we are now investigating selling our bespoke 77 DSLR photogrammetry rig.

This is a complete, professional, and configurable rig for highly detailed and textured 3D body scans.

There is a showreel with some of the work we’ve done here:
https://vimeo.com/912414065

There are raw scans and image sets, as well as a detailed component breakdown here:
https://drive.google.com/drive/folders/1zpC-IBhkSI1cXnj6beKg3vqQRICi31sG?usp=sharing

Our scanning rig has the following features:

Custom built trussing set up.
The trussing forms a walk in ‘cage’ that bolts together and comes apart into sections for transport, also have extensions that can be added to the top

The trussing can additionally be configured as a large 5m ring for time freeze capture.

Cameras

The setup uses 77 x Nikon D3300 24MP cameras with 18-55mm kit lenses.

The cameras are on adjustable ballheads that are fixed to clamps that in turn attach to the trussing

This means the cameras can be configured according to needs.

For full body capture they can be spread evenly around the height of the rig (7 cameras on each of the 11 vertical trusses) and zoomed out (18mm)

For super detailed head scans, or grouped and zoomed in (55mm) for extremely high detailed head or object scans.

Each camera has its own power pack, so all cameras are fully powered from mains power.

Each camera has its own wireless trigger which takes 2 x AAA batteries
Flash

There are 8 YONGNUO YN560 Ⅳ 2.4GHz Flash Speedlites that are also on clamps and so configurable in terms of position and spread. They are diffused by bouncing off a small flash umbrella. The trussing is also surrounded by white material to help the diffuse lighting

These are also mains powered through a bespoke recharger unit.

There are also spare flash units which could be used in the rig.

All speedlites are controllable through a main flash trigger

Data

All cameras and flashes are fired using a single trigger

Each camera is connected via USB cable to one of 11 USB hubs, in the current setup, these feed directly to a single main PC.

The free software DigiCamControl is being used to retrieve images from the cameras to a master PC after each set is shot.

The images are then being processed using Reality Capture on a 3070 graphics card. A full textured model can be built in just a few minutes. Reality Capture is now free for small companies.

Please note that the computer is NOT included in the sale

Components

There is a more detailed breakdown of the components here:

https://docs.google.com/spreadsheets/d/1XR6UZ3LqUDdu6HMzmzruz2KlBkJEO82wonkXMAu8PR8/edit?usp=sharing

I should have all the original boxes and accessories for the cameras

If you have any further questions or need any more information please email me ian at 3dify.co.uk

No time wasters or scammers, this is for serious buyers only who understand these systems.