Features
Support
Community
Downloads
Buy
About
Forum
Home
Search
Login
Register
Agisoft Metashape
»
Agisoft Metashape
»
General
»
A Walk Through the Museum
« previous
next »
Print
Pages: [
1
]
Author
Topic: A Walk Through the Museum (Read 8105 times)
tai_pinc
Newbie
Posts: 27
A Walk Through the Museum
«
on:
May 03, 2014, 12:26:03 PM »
Hi,
I wanted to share some of my latest work with PhotoScan. This isn't my first post, but it's the first time I'm showing some results.
Thanks to the newer version of PS I was able to finally create some models on my on (after some help from Wishgrater). I don't really understand the change (maybe someone can explain me) but finally I can create meshes (with medium dense point-cloud, and high quality meshes) at a reasonable time. Up until now I constrained myself to creating point-clouds only.
So here are some models I made while visiting the Israel Museum in Jerusalem. Shot with Canon 6D and 50mm (some models have missing parts because it was impossible to shot from that direction).
If you have any tips for me I would like to know... and questions as well.
https://skfb.ly/zSpP
https://skfb.ly/zS6n
https://skfb.ly/zRWM
https://skfb.ly/zRRJ
- Tai
Logged
admir
Jr. Member
Posts: 93
Re: A Walk Through the Museum
«
Reply #1 on:
May 03, 2014, 02:38:29 PM »
Looks good! Can you show solid shaded models, textures most of time hide imperfections and quality of mesh created.
Admir
Logged
tai_pinc
Newbie
Posts: 27
Re: A Walk Through the Museum
«
Reply #2 on:
May 03, 2014, 06:56:11 PM »
Thanks.
Here are the links to the models with no texture (on sketchfab they appear a little soft. but you can turn on wireframe mode):
https://skfb.ly/zSus
- For this one there was not enough light on display. Had to use higher ISO. I guess that's why there's only around 350k triangles. Also maybe there's not enough detail on the sandstone?
https://skfb.ly/zSuA
- Best result with 1250k triangles.
https://skfb.ly/zSuF
- My favorite - except the ugly chin.
https://skfb.ly/zSuH
- A lot of noise. Did some cleaning on the dense point cloud before meshing.
https://skfb.ly/zSuI
Here's how I shot it -
Logged
jerry7171
Newbie
Posts: 27
Re: A Walk Through the Museum
«
Reply #3 on:
May 05, 2014, 02:42:21 AM »
These models you've created look incredible! I am slowly learning to use Photoscan. After looking at your models, I can't wait to start again.
Logged
tai_pinc
Newbie
Posts: 27
Re: A Walk Through the Museum
«
Reply #4 on:
May 05, 2014, 10:05:53 AM »
Thanks Jerry!
Logged
Wishgranter
Hero Member
Posts: 1202
Re: A Walk Through the Museum
«
Reply #5 on:
May 05, 2014, 10:17:50 AM »
Hi Tai_Pinc
Thanx for mentioning me :-D
Yup, they look good, and as you see own experimenting is the bey way to learn......
Logged
----------------
www.mhb.sk
sastun1962
Newbie
Posts: 36
Re: A Walk Through the Museum
«
Reply #6 on:
May 05, 2014, 06:39:03 PM »
great work!
Logged
Jack_in_CO
Newbie
Posts: 17
Re: A Walk Through the Museum
«
Reply #7 on:
May 06, 2014, 01:35:22 AM »
You should also get improved results if you turn the camera 90-degrees to take both landscape and portrait oriented images.
Logged
tai_pinc
Newbie
Posts: 27
Re: A Walk Through the Museum
«
Reply #8 on:
May 06, 2014, 11:27:28 AM »
Thanks, I'll try it out
Logged
Print
Pages: [
1
]
« previous
next »
Agisoft Metashape
»
Agisoft Metashape
»
General
»
A Walk Through the Museum
Features
Support
Community
Downloads
Buy
About
Features
Support
Community
Downloads
Buy
About
Metashape presentation
(PDF, 5 Mb)