Forum

Author Topic: Ground control total error value  (Read 4241 times)

arthurb

  • Newbie
  • *
  • Posts: 5
    • View Profile
Ground control total error value
« on: May 31, 2014, 08:48:52 AM »
Hi,

Is it possible for me to get the ground control "Total Error" value from a chunk via a python script in Photoscan?

I attached a screenshot showing the value I want to read,  in the figure it shows as "17.158204". I was not able to find information about this on the Python Reference or the Python forum.

Thanks.

Alexey Pasumansky

  • Agisoft Technical Support
  • Hero Member
  • *****
  • Posts: 14765
    • View Profile
Re: Ground control total error value
« Reply #1 on: June 03, 2014, 08:54:42 AM »
Hello Arthur,

Currently it is not accessible directly, to get this value it is necessary to calculate individual errors at first as a difference between source values and estimated by PhotoScan.
Best regards,
Alexey Pasumansky,
Agisoft LLC

arthurb

  • Newbie
  • *
  • Posts: 5
    • View Profile
Re: Ground control total error value
« Reply #2 on: June 03, 2014, 08:58:01 AM »
Thank you.

I was hopping to not need to do that, but if it's needed let's do it.