Forum

Author Topic: Chunks from different .psz files  (Read 4705 times)

rams.2014

  • Newbie
  • *
  • Posts: 5
    • View Profile
Chunks from different .psz files
« on: June 18, 2014, 05:42:02 PM »
Hey,

I'm relatively new to Photoscan and was curious if anyone had some advice on if there was a good way to manage several chunks from different working projects. I am compiling orthophotos of a very large area in Puerto Rico and have been splitting them up by different municipios (essentially counties). The end goal however is to have one orthophoto of the entire area. Should I be aligning ALL of the photos at one time, in one project, or is there an easy way to move photos and their respective markers from other projects into one big project?

Thanks,

P

frank.stremke

  • Full Member
  • ***
  • Posts: 206
    • View Profile
Re: Chunks from different .psz files
« Reply #1 on: June 18, 2014, 06:38:23 PM »
Hello try file and then append it will create a new chuck from that file as long as you use the same coordinate system everything is fine
Otherwise use the allign chunks procedure
Frank

rams.2014

  • Newbie
  • *
  • Posts: 5
    • View Profile
Re: Chunks from different .psz files
« Reply #2 on: June 18, 2014, 07:00:55 PM »
Frank,

Thanks for the tip, will try that this afternoon!

Patrick