Forum

Author Topic: Agisoft PhotoScan 1.1.0 pre-release  (Read 154551 times)

Alexey Pasumansky

  • Agisoft Technical Support
  • Hero Member
  • *****
  • Posts: 14103
    • View Profile
Re: Agisoft PhotoScan 1.1.0 pre-release
« Reply #60 on: September 29, 2014, 05:17:49 PM »
I`ve got problem in 1.1.0 build 1976 release with variable placeholders in path property, in export model batch process job. In 1.0.4 version things like {projectfolder} and {chunklabel} was working, it was really helpful then running longer renders with many chunks. Right now it doesnt work at all. Value for path like {chunklabel}.obj creates files {chunklabel}.obj, so it doesnt allow to batch process and export more than one chunk, because every of them except last one will be overwritten.
Should i use diffrent tokens for chunk label? Does that functionality changed? Im talking about standard version.
Hello slawek555,

Thank you for reporting. Will try to fix it also in the next update.
Best regards,
Alexey Pasumansky,
Agisoft LLC

andyroo

  • Sr. Member
  • ****
  • Posts: 413
    • View Profile
Re: Agisoft PhotoScan 1.1.0 pre-release
« Reply #61 on: September 29, 2014, 09:29:31 PM »
I caused a crash in beta build 1976 by running two instances exporting orthophoto tiles to two different directories.

Export properties were:

Projection: Geographic/WGS 84 (EPSG::4326)
Image blending mode: average
color correction: enabled
pixel size <default>
split in blocks (1024x1024)
region <unchecked>
write kml <unchecked>
write world file <checked>

No files were created.  Not sure if the crash would occur with a single instance, or with region  boundary set. Trying now with default region boundaries and one instance. Also occurred running a single instance, with region boundary set (threw two application errors). Here's my system event log and photoscan log:

Instance 1 (crash at 16:26:45)
Faulting application name: photoscan.exe, version: 1.0.0.1, time stamp: 0x541d54b3
Faulting module name: cholmod.dll, version: 0.0.0.0, time stamp: 0x53d15936
Exception code: 0xc000001d
Fault offset: 0x00000000000968e6
Faulting process id: 0x6dec
Faulting application start time: 0x01cfda9dbd0e61fb
Faulting application path: C:\Program Files\Agisoft\PhotoScan Pro\photoscan.exe
Faulting module path: C:\Program Files\Agisoft\PhotoScan Pro\cholmod.dll
Report Id: e87c742e-4766-11e4-9843-bc305bc9e488


Instance 2 (crash at 16:37:02)
Faulting application name: photoscan.exe, version: 1.0.0.1, time stamp: 0x541d54b3
Faulting module name: cholmod.dll, version: 0.0.0.0, time stamp: 0x53d15936
Exception code: 0xc000001d
Fault offset: 0x00000000000968e6
Faulting process id: 0xb564
Faulting application start time: 0x01cfda9f7edd5130
Faulting application path: C:\Program Files\Agisoft\PhotoScan Pro\photoscan.exe
Faulting module path: C:\Program Files\Agisoft\PhotoScan Pro\cholmod.dll
Report Id: 58385c1c-4768-11e4-9843-bc305bc9e488


Crash 3 (only one instance running, crash at 15:25:07 threw two errors)
Faulting application name: photoscan.exe, version: 1.0.0.1, time stamp: 0x541d54b3
Faulting module name: cholmod.dll, version: 0.0.0.0, time stamp: 0x53d15936
Exception code: 0xc000001d
Fault offset: 0x00000000000968e6
Faulting process id: 0x808c
Faulting application start time: 0x01cfdc109e8c61fc
Faulting application path: C:\Program Files\Agisoft\PhotoScan Pro\photoscan.exe
Faulting module path: C:\Program Files\Agisoft\PhotoScan Pro\cholmod.dll
Report Id: 76ce36a8-4827-11e4-9843-bc305bc9e488

and second error at same time
Windows cannot access the file  for one of the following reasons: there is a problem with the network connection, the disk that the file is stored on, or the storage drivers installed on this computer; or the disk is missing. Windows closed the program Agisoft PhotoScan because of this error.

Program: Agisoft PhotoScan
File:

The error value is listed in the Additional Data section.
User Action
1. Open the file again. This situation might be a temporary problem that corrects itself when the program runs again.
2. If the file still cannot be accessed and
   - It is on the network, your network administrator should verify that there is not a problem with the network and that the server can be contacted.
   - It is on a removable disk, for example, a floppy disk or CD-ROM, verify that the disk is fully inserted into the computer.
3. Check and repair the file system by running CHKDSK. To run CHKDSK, click Start, click Run, type CMD, and then click OK. At the command prompt, type CHKDSK /F, and then press ENTER.
4. If the problem persists, restore the file from a backup copy.
5. Determine whether other files on the same disk can be opened. If not, the disk might be damaged. If it is a hard disk, contact your administrator or computer hardware vendor for further assistance.

Additional Data
Error value: 00000000
Disk type: 0

Photoscan log
Code: [Select]
Calculating vertex colors...
processing nodes...  done in 0.772 sec
calculating colors... done in 123.381 sec
accumulating data... done in 12.571 sec
octree constructed in 0.182 sec
selected 5 cameras
preloading data... done in 0.788 sec
filtering depth maps... done in 5.751 sec
accumulating data... done in 2.397 sec
octree constructed in 0.001 sec
selected 22 cameras
preloading data... done in 2.649 sec
filtering depth maps... done in 36.8 sec
accumulating data... done in 12.986 sec
octree constructed in 1.211 sec
selected 8 cameras
preloading data... done in 0.839 sec
filtering depth maps... done in 6.818 sec
accumulating data... done in 4.008 sec
octree constructed in 0.323 sec
selected 22 cameras
preloading data... done in 2.328 sec
filtering depth maps... done in 54.172 sec
accumulating data... done in 9.154 sec
octree constructed in 0.4 sec
selected 39 cameras
preloading data... done in 3.925 sec
filtering depth maps... done in 145.937 sec
accumulating data... done in 19.667 sec
octree constructed in 0.423 sec
selected 10 cameras
preloading data... done in 1.138 sec
filtering depth maps... done in 20.698 sec
accumulating data... done in 4.029 sec
octree constructed in 0 sec
selected 1 cameras
preloading data... done in 0.284 sec
filtering depth maps... done in 0.03 sec
accumulating data... done in 0.941 sec
octree constructed in 0 sec
selected 2 cameras
preloading data... done in 0.432 sec
filtering depth maps... done in 0.834 sec
accumulating data... done in 1.125 sec
octree constructed in 0 sec
233898530 points extracted
Generating mesh...
generating 54671x15090 grid (0.00216833 resolution)
grid rasterized in 3.357 sec
filtering median... done in 6.523 sec
filtering idw... done in 16.098 sec
filtering median... done in 5.973 sec
constructed triangulation from 4010172 vertices, 8020338 faces
grid interpolated in 267.402 sec
 done in 774.076 sec
Saving project...
filtered borders in 82.66 sec
triangulating...saved project in 397.117 sec
Finished processing in 11221 sec (exit code 1)
 100000000 points 199995575 faces done in 1332.92 sec
Calculating vertex colors...
processing nodes...  done in 0.727 sec
calculating colors...  done in 420.568 sec
Finished processing in 12582.6 sec (exit code 1)
Finished processing in 0 sec (exit code 1)
Finished processing in 0 sec (exit code 1)
initializing renderer... initializing renderer... tessellating mesh...tessellating mesh...done (189783323 -> 189783323 faces)
done (196821131 -> 196821131 faces)
done in 573.358 sec
Raster size: 91872x29813
Estimating mosaic occupancy...
done in 584.312 sec
Raster size: 86752x22263
Estimating mosaic occupancy...
757 blocks used from 85x22 (40%)
Calculating color correction...
collecting control points... 963 blocks used from 90x30 (35%)
Calculating color correction...
collecting control points... collected 4555811 points in 1007.13 sec
collected 6001486 points in 1046.1 sec
analyzing 326 images... ************************************************************************************************************************************************************************************************************************************************************************************************************************************** done in 131.043 sec
estimating corrections...
disabled 108588 out of 4095380 points (rms error 0.082997)
bundle_adjust: analyzing 347 images... *********************************************************************************************************************************************************************************************************************************************************************************************************************************************************** done in 79.247 sec
estimating corrections...
disabled 49941 out of 4800762 points (rms error 0.0525449)
bundle_adjust:

Looks like I'll have to re-install the previous version and try...
« Last Edit: September 30, 2014, 07:45:00 AM by andyroo »

Alexey Pasumansky

  • Agisoft Technical Support
  • Hero Member
  • *****
  • Posts: 14103
    • View Profile
Re: Agisoft PhotoScan 1.1.0 pre-release
« Reply #62 on: September 30, 2014, 05:53:33 PM »
Hello Andy,

Have you submitted the crash report?

You can check the following folder if there are any pending crash reports: C:\Documents and Settings\<user-name>\Application Data\Agisoft\PhotoScan Professional Edition\Crash Reports\
Best regards,
Alexey Pasumansky,
Agisoft LLC

xabierr

  • Jr. Member
  • **
  • Posts: 79
    • View Profile
Re: Agisoft PhotoScan 1.1.0 pre-release
« Reply #63 on: September 30, 2014, 11:11:57 PM »
Hi Alexey,

Great new version! However, tried to use the fisheye support but the program crashed (no pending reports) while aligning (high quality) 173 14 Mpx photos on my laptop (i7 @ 2.8 GHz with 8 Gb RAM, Windows 7). Tried the same with 1.04 and worked (~5 hours). How much more memory does the fisheye support needs?

cheers,

Javier 
« Last Edit: September 30, 2014, 11:14:11 PM by xabierr »

Alexey Pasumansky

  • Agisoft Technical Support
  • Hero Member
  • *****
  • Posts: 14103
    • View Profile
Re: Agisoft PhotoScan 1.1.0 pre-release
« Reply #64 on: September 30, 2014, 11:27:02 PM »
Hello Javier,

Fisheye doesn't require any additional memory or processing time. So have you submitted the crash report, probably it is unrelated with the fisheye?
Best regards,
Alexey Pasumansky,
Agisoft LLC

xabierr

  • Jr. Member
  • **
  • Posts: 79
    • View Profile
Re: Agisoft PhotoScan 1.1.0 pre-release
« Reply #65 on: October 01, 2014, 12:57:27 AM »
no pending crash reports. just closes down just before alignment has finished.

andyroo

  • Sr. Member
  • ****
  • Posts: 413
    • View Profile
Re: Agisoft PhotoScan 1.1.0 pre-release
« Reply #66 on: October 01, 2014, 03:30:32 AM »
Hi Alexey, I am running Windows 7, and only found old crash reports in

C:\Users\[username]\AppData\Roaming\Agisoft\PhotoScan Professional Edition\Crash Reports\pending

(from may 2013)

Let me know if there's anything else I can do.

Andy

JMR

  • Sr. Member
  • ****
  • Posts: 461
    • View Profile
Re: Agisoft PhotoScan 1.1.0 pre-release
« Reply #67 on: October 02, 2014, 02:34:10 PM »
Please, dear friends, could you describe how do the so-called "non coded cross markers" should look like?
Thanks!

Alexey Pasumansky

  • Agisoft Technical Support
  • Hero Member
  • *****
  • Posts: 14103
    • View Profile
Re: Agisoft PhotoScan 1.1.0 pre-release
« Reply #68 on: October 02, 2014, 02:48:42 PM »
Hello José,

It should look like the following sample:
Best regards,
Alexey Pasumansky,
Agisoft LLC

macsurveyr

  • Jr. Member
  • **
  • Posts: 65
    • View Profile
Re: Agisoft PhotoScan 1.1.0 pre-release
« Reply #69 on: October 03, 2014, 01:09:32 AM »
Using the new multiple photo tab functionality on a Mac is limited. I don't see any way of moving a tab to another tab group like I can on windows.

Am I missing something?

Tom

halonso

  • Newbie
  • *
  • Posts: 8
    • View Profile
Re: Agisoft PhotoScan 1.1.0 pre-release
« Reply #70 on: October 03, 2014, 05:42:30 AM »
Hi,

The RSM after run Optimmize Photo Alignment not work as in version 1.0.4, made a change to the tool?

thank you

halonso

Alexey Pasumansky

  • Agisoft Technical Support
  • Hero Member
  • *****
  • Posts: 14103
    • View Profile
Re: Agisoft PhotoScan 1.1.0 pre-release
« Reply #71 on: October 03, 2014, 10:45:39 AM »
Hello Tom,

Thank you for reporting, we'll check and fix that.
Best regards,
Alexey Pasumansky,
Agisoft LLC

Alexey Pasumansky

  • Agisoft Technical Support
  • Hero Member
  • *****
  • Posts: 14103
    • View Profile
Re: Agisoft PhotoScan 1.1.0 pre-release
« Reply #72 on: October 03, 2014, 10:46:47 AM »
Hello halonso,

Do you mean that the result of Optimization procedure is different based on the same camera alignment and with the same settings in 1.0 and 1.1?
Best regards,
Alexey Pasumansky,
Agisoft LLC

ThomasVD

  • Full Member
  • ***
  • Posts: 107
    • View Profile
Re: Agisoft PhotoScan 1.1.0 pre-release
« Reply #73 on: October 04, 2014, 06:01:28 PM »
Two quick remarks on the new version:

1) Like someone already mentioned, ctrl + click to select multiple groups of pictures no longer works. Also in the previous version you could shift + click to select a whole series of photos, then ctrl + click on a next set without losing the ones you previously selected, and once again do shift + click to select a whole series. The result is that you could select certain groups of pictures together. This no longer works in the new version.

2) In the previous version you could add a marker to a chunk, select that marker in one picture, change the name, for instance from point 1 to point 100, and then all subsequent markers you added would automatically get names following from the highest number (ie next marker would automatically be 101 rather than 2). This was very useful when trying to align multiple chunks with marker-based align: the markers between chunk 1 and 2 would for instance be point 1-5, then for markers between chunk 1 and chunk 3 I would use points 101-105 etc. It was also useful for manually aligning pictures in different chunks, if you knew those chunks would later be merged, to avoid duplicate markers in different locations. In version 1.1 markers do not continue from the highest named marker, meaning you have to manually change the name of every single marker.

halonso

  • Newbie
  • *
  • Posts: 8
    • View Profile
Re: Agisoft PhotoScan 1.1.0 pre-release
« Reply #74 on: October 06, 2014, 04:39:43 PM »
Hello halonso,

Do you mean that the result of Optimization procedure is different based on the same camera alignment and with the same settings in 1.0 and 1.1?

Hello Alexey,

Yes, if the same alignment.

Thank you.