Agisoft Metashape > Agisoft Viewer

AgiSoft Viewer

<< < (4/4)

Mdaemon:
@ Darko

the work can be easily made with quantum gis. qgis is a free of charge gis platform which corresponds well with agisoft and, together with some programs of guthrie also with the cad world.

Martin

Darko:
Hi guys,

Thanks for your suggestions. I'll check QGis for sure. As a stereo plotter I am currently using Photomod and it's OK since you can orient the photos in the Agi and later use external and interior orientations directly in Photomod, and it works.... BUT !! When you want to see the house from the side to actually see the wall, not the roof, and capture the corner, it is hard to do. When you make a nice TLS model from Agi you feel like you are there, on the field and you can walk the streets and see the details. The only thing you have to do is to take a regular pattern photos with at least 80% of overlap both ways with the wide angle lens flying on 200m or so. Make a HQ dense cloud and next step is just to export the model in the tls format. View it with the viewer and you'll know what I am talking about. If you want me I can send you nice looking sample of the old fortrees Tvrda in Osijek.

Best regards,
Darko

Darko:

Dear Diego,

It is not the same! I have a digital stereo photogrammetric station - PhotoMod by Racurs and it works fine, but the 3D stereoview from the top is never like side view that you can achieve by Agisoft Viewer. Please, try to open and see the attached model of Tvrdja in Osijek and walk the streets.... That is the feeling like you are there on the site. You just miss the measuring tape to measure the windows, doors, walls, interior yards, whatever you like.
Try it and share your experience, please. (Link below)

Darko

https://drive.google.com/folderview?id=0B_8TRoRfVwEDfnRMbjJDaHZVdmRaeHhKak5ZaTQ5cEhsV2JTNmtqdGx4RnktTGxiOWh1UjA&usp=sharing

frank.stremke:
hi
you can always create markers inside photoscan of the corners you like to have and export the estimatedt position into a txt file then import that into cad software and you are set to draw your plans
frank

Navigation

[0] Message Index

[*] Previous page