Forum

Author Topic: Some cameras have insufficient projections and need to be reset?  (Read 4218 times)

SuperNewb

  • Newbie
  • *
  • Posts: 42
    • View Profile
First time I ever recieved this message while trying to optimize to high accuracy gcps.  Is this something new in this release?

Alexey Pasumansky

  • Agisoft Technical Support
  • Hero Member
  • *****
  • Posts: 15124
    • View Profile
Re: Some cameras have insufficient projections and need to be reset?
« Reply #1 on: April 02, 2015, 11:53:44 AM »
Hello SuperNewb,

We've added this warning message to avoid optimization issues related to the cameras with zero or insufficient number of projections.
Best regards,
Alexey Pasumansky,
Agisoft LLC

SuperNewb

  • Newbie
  • *
  • Posts: 42
    • View Profile
Re: Some cameras have insufficient projections and need to be reset?
« Reply #2 on: April 03, 2015, 01:06:25 AM »
Thanks Alex,

I am in the middle of processing 1927 photos into a dense cloud.  The images were captured using the inspire 1 UAV platform. 

The inspire does not provide the elevation as meters asl but rather by meters ato in the metadata of the photos.  This leaves a huge gap between where the photos think they are in space vs. where the GCPs say they have to be. 

I pined all the GCPs and then received that message as I was optimizing the scene.  The data set is quite large so the dense cloud is still in the reconstructing depth phase.  so far on hour 15.

Will the descrepencies between the elevations in the geotags and the GCPs give me any problems?  I unchecked all the cameras before optimizing.

Thanks again,

SuperNewb

  • Newbie
  • *
  • Posts: 42
    • View Profile
Re: Some cameras have insufficient projections and need to be reset?
« Reply #3 on: April 03, 2015, 06:39:35 AM »
Generating dense cloud has now been stuck at 10% for 5 hours. 

Photoscan version 1.1.4
128gb ram  (50gb being used by this photoscan session)
dual xeon 2690
1927 photos in chunk
Dense build Quality set to High


Will this session pull through, or am I hooped? I'm running tight on time for delivery or I would normally just troubleshoot it myself through different settings

Thanks,