Forum

Author Topic: Agisoft PhotoScan 1.2.0 pre-release  (Read 306304 times)

Alexey Pasumansky

  • Agisoft Technical Support
  • Hero Member
  • *****
  • Posts: 15275
    • View Profile
Re: Agisoft PhotoScan 1.2.0 pre-release
« Reply #135 on: September 14, 2015, 09:35:03 AM »
Hello bisenberger,

We'll check the hole filling issue regarding the DEM genration from mesh.

As for the orthophotos export from the selected cameras, are you sure that selection isn't discarded when you right-click in the Workspace pane?
Best regards,
Alexey Pasumansky,
Agisoft LLC

Mohammed

  • Full Member
  • ***
  • Posts: 192
    • View Profile
Re: Agisoft PhotoScan 1.2.0 pre-release
« Reply #136 on: September 14, 2015, 05:09:58 PM »
Hi, Alexey Pasumansky

-Could i ask were's Keep Uv option in build texture map?

Thanks,,
Mohamed

Diego

  • Full Member
  • ***
  • Posts: 167
    • View Profile
Re: Agisoft PhotoScan 1.2.0 pre-release
« Reply #137 on: September 14, 2015, 07:03:35 PM »
We'll check the hole filling issue regarding the DEM genration from mesh.

Hi Alexey,

Error build DEM for Mesh

Error: Zero resolution

regards,

Diego

bisenberger

  • Sr. Member
  • ****
  • Posts: 341
    • View Profile
    • Digital Mapping & Graphics
Re: Agisoft PhotoScan 1.2.0 pre-release
« Reply #138 on: September 14, 2015, 10:26:32 PM »
As for the orthophotos export from the selected cameras, are you sure that selection isn't discarded when you right-click in the Workspace pane?

Yes, that is when it happens.
Digital Mapping & Graphics LLC
https://digital-mapping.net/

Pascal

  • Newbie
  • *
  • Posts: 20
    • View Profile
Re: Agisoft PhotoScan 1.2.0 pre-release
« Reply #139 on: September 15, 2015, 11:56:29 AM »
Hello Alexey,
I tested the last Photoscan release and I experienced some lag (the display freeze during one second every two seconds approximatively)  in model and photos display.
This appends only after having opened a mesh model, before doing this all was ok.
This is a little bit annoying in big project when you have to navigate between photos or to do selection in cloud model.
May be you can do something to fix it.
Thanks.
Pascal

Mohammed

  • Full Member
  • ***
  • Posts: 192
    • View Profile
Re: Agisoft PhotoScan 1.2.0 pre-release
« Reply #140 on: September 15, 2015, 01:33:15 PM »
Hi Alexey,
I notice that while i merge chunks, the Shaded mode disappeared!, and the number of faces is gone!!!!
Is i do some thing wrong?
Thanks
Mohamed

Alexey Pasumansky

  • Agisoft Technical Support
  • Hero Member
  • *****
  • Posts: 15275
    • View Profile
Re: Agisoft PhotoScan 1.2.0 pre-release
« Reply #141 on: September 16, 2015, 12:24:26 AM »
Error build DEM for Mesh

Error: Zero resolution
Hello Diego,

Have you checked it after updating to the build 2145? Probably you'll also need to rebuild mesh.
Best regards,
Alexey Pasumansky,
Agisoft LLC

Alexey Pasumansky

  • Agisoft Technical Support
  • Hero Member
  • *****
  • Posts: 15275
    • View Profile
Re: Agisoft PhotoScan 1.2.0 pre-release
« Reply #142 on: September 16, 2015, 12:27:31 AM »
Hello Mohamed,

Thank you for reporting.

We'll fix that.
Best regards,
Alexey Pasumansky,
Agisoft LLC

Diego

  • Full Member
  • ***
  • Posts: 167
    • View Profile
Re: Agisoft PhotoScan 1.2.0 pre-release
« Reply #143 on: September 16, 2015, 04:30:14 AM »
Error build DEM for Mesh

Error: Zero resolution
Hello Diego,

Have you checked it after updating to the build 2145? Probably you'll also need to rebuild mesh.

Hi Alexey,

I'm using the latest version 1.2.0 build 2154.

The problem presents the imported mesh, and I can not rebuild the mesh again, because it is a lidar DTM and is edited and ready to orthophoto. in version 1.1.6 orthophoto with mesh works perfect, so the possibility of requesting a function to import the DEM, or at least to define the resolution of the DEM when it is built starting from an imported mesh.

See attached image

Regards,

Diego
« Last Edit: September 16, 2015, 02:12:09 PM by Diego »

Alexey Pasumansky

  • Agisoft Technical Support
  • Hero Member
  • *****
  • Posts: 15275
    • View Profile
Re: Agisoft PhotoScan 1.2.0 pre-release
« Reply #144 on: September 16, 2015, 07:49:29 AM »
Hello Diego,

Thanks for mentionning about imported mesh, we'll try to reproduce it and fix as soon as possible.
Best regards,
Alexey Pasumansky,
Agisoft LLC

mirijovsky

  • Newbie
  • *
  • Posts: 13
    • View Profile
Re: Agisoft PhotoScan 1.2.0 pre-release
« Reply #145 on: September 16, 2015, 05:07:22 PM »
Hello Alexey,

I received one information from your team few months ago (see below). Do you plan to implement it?

"As for the use of external GeoTIFF elevation information for the orthophoto generation, we are working on additional orthophoto related features for the next version release (v. 1.2) and input of the elevation TIFF will be likely implemented there (maybe not in the first pre-release for the version)."


Regards,
Jakub

Bing66

  • Newbie
  • *
  • Posts: 25
    • View Profile
Re: Agisoft PhotoScan 1.2.0 pre-release
« Reply #146 on: September 17, 2015, 10:04:33 PM »
Hi
Lots of nice new features, but on the create report, keep getting only a portion of the models as the ortho on the first page, tried it at differnt settings, ie, xy, top etc, any ideas, maybe me thats missing something
cheers

Pascal

  • Newbie
  • *
  • Posts: 20
    • View Profile
Re: Agisoft PhotoScan 1.2.0 pre-release
« Reply #147 on: September 18, 2015, 11:28:13 AM »
Hello Alexey,
the 'lag' I observed in the model view seems not to be dur to the mesh, it appears also with
a sparse cloud, but not immediately after opening a project just some minutes after ...
I restarted the pc and there is no other heavy programs running.
It appends also on light projects (less than 40 images),it appends also if I move the photoscan's windows (stop moving during 1 sec and move again, this do not append with windows from other programs)
May be do you have an idea?
Thanks.
Pascal
« Last Edit: September 18, 2015, 11:55:58 AM by Pascal »

Bing66

  • Newbie
  • *
  • Posts: 25
    • View Profile
Re: Agisoft PhotoScan 1.2.0 pre-release
« Reply #148 on: September 22, 2015, 04:38:43 AM »
so I have loads of white gaps in my ortho, cant work out why, still trying to figure the workflow, any ideas, cheers

stihl

  • Sr. Member
  • ****
  • Posts: 410
    • View Profile
Re: Agisoft PhotoScan 1.2.0 pre-release
« Reply #149 on: September 24, 2015, 01:02:24 PM »
Alexey,

Would it be possible to implement a shortcut/keybinding to Show/Hide the seamlines in the Orthomosaic editor?
It's kind of tedious having to click it everytime, unless there's a keybinding for it already.