Agisoft PhotoScan 1.2.0 pre-release

[Alexey Pasumansky]

Hello Giancan,

Still we are not able to reproduce the problem: we got dense cloud in one coordinate system, then we crop the cloud and build DEM in another coordinate system: the resulting DEM is based only on the cropped part of the cloud (though it may be interpolated to the bounding box limits).

[Mr_Handsome]

Hi
We still run the 1.1 version. The update to 1.1 seem to have removed the possibility to generate large tiled models with manual control of mesh such as generating method (we need heightfeild) and the number of polygon in the mesh. Today the mesh is based on arbitrary and mesh resolution cannot be decided manually. Previously we could export for example collada using the already meshed model.

Question:
Is it possible to add a manual choice for the 1.2

- manual control over the tiled model generation such as heightfield or arbitrary and also number of triangles in the mesh. The mesh should be built at high and then decimated to create a sharper mesh. And only autogenerate the tiled texture based on generic and a resolution by choice.

 We use agisoft for city projects and love it but the removal of manual control of the tiled models will soon force us to look at other programs.

Thanks for a great program!

Fredrik

[Mohammed]

Dear agisoft,

While i export the DEM i found some extra part exported with it, how i remove it in PS? its annoying me while i tried to generate contour!! the previous version 1.1 hasn't that issue.
Thanks
Mohamed

[dobermunk]

Haven't read all the posts here, apologies if it's already been reported.

- I LOVE the selection tools. VERY useful. Thanks!
- the batch process doesn't seem to be working. It will spend all of the time calculating but not write out any files. I would like to see this working - of course - and also a batch process across numerous files. ie: 1) set up alignment and area to process for x files 2) determine the batch parameters and then 3) launch > it would then work through one file after the other

Thanks again. Great to see this work being done!

[djbill]

Hi all,

is it possible have an import mask like 1.1.6? In detail I prefer have the option to skip "Error: Can't load image: D:\fake path/_MG_5348.png" with a blank mask...

[eriks]

sorry double post.

[eriks]

Hello,
I did install the latest beta, photoscan-pro_1_2_0_x64_2181beta, and get this extremely strange colours on the orthophoto!! For some reason, photoscan have not been able to create a complete mesh in the area also, but it is extrapolated.
The seamlineeditor is very promising!
The possibility to save batch-jobs is great 
but when I close and reopen, the path; {projectfolder}/{chunklabel}.LAS
from the xml-line:
 <param name="path" value="{projectfolder}/{chunklabel}.LAS"/>
is replaced by adding the full absolute path like this:
d:\data\X8projects\{projectfolder}/{chunklabel}.LAS
and I have to manually edit the batch job to:    {projectfolder}/{chunklabel}.LAS
Thanks, looks exciting!

But for now I revert back to my latest working version:  photoscan-pro_1_1_3_x64_2018

[JMR]

Hi Mohamed: it looks like you have created the mesh with the extrapolation option enabled.

Dear agisoft,

While i export the DEM i found some extra part exported with it, how i remove it in PS? its annoying me while i tried to generate contour!! the previous version 1.1 hasn't that issue.
Thanks
Mohamed

[Mohammed]

Dear Agisoft,
i Align only 16 images and it give me an Error Not enough Memory its very weird whit this new update i tried to Align in Medium also and give me same Error!!! Plez help most of my projects saved in PSX.
Thanks,,

[Alexey Pasumansky]

Hello tornado2011,

Is it possible that you have accidentally installed 32-bit version of PhotoScan?

As for your request regarding the contour lines and extrapolated geometry, we'll try to add an option to generate contours only inside the polygon shape marked as border.

[Mohammed]

Hello tornado2011,

Is it possible that you have accidentally installed 32-bit version of PhotoScan?

As for your request regarding the contour lines and extrapolated geometry, we'll try to add an option to generate contours only inside the polygon shape marked as border.

Dear Alexey ,
Thank you for your quick replay!
i fixed the problem thanks!
I hope you do it also with the DEM the extra poly very annoying! i hope also to add the altitude information in the contour lines! 
Thank you,
Mohamed

[Mohammed]

Dear Agisoft,

Another important issue with the new update related to generating  Orthophoto. as you can see in the new update when i tried to build the orthophoto i found some weird lines color it never happen before so i install the previous version 1.1.6 and its gone?so plz try to fix it ASAP!
Thanks

[kgrover]

I am having problems with the Measure Shape tools on a DEM. I have a stockpile that i drew a shape around, and used the measure shape command, and the volumes are out to lunch.

However, it seems to be with how the polygon is created. I picked points with the polygon tool, on areas entirely withing the DEM, but when you perform "measure shape", on the planar tab has many of the polygon nodes with an elevation of 0.

It seems like when picking points of the polygon some elevations are to the DEM, while others are Zero. Anyone else have this issue??

Kevin

[bisenberger]

When exporting an orthomosaic the no data area is black is there a way to export with a white no data area?

[SuperNewb]

Hi Alexey,

I am getting this error when building dense point cloud on high setting.

"ocl_engine.cpp Line 231: clEnqueueWriteBuffer failed"

It happens once or twice during a medium quality build but during a build on high it is pretty much constantly switching to use the CPU.

The video card being used is a radeon HD 7990 with latest drivers installed...  Could it be a temperature issue?  what should I be looking for?

Thanks