Forum

Author Topic: bublcam support.  (Read 4856 times)

MeHoo

  • Full Member
  • ***
  • Posts: 136
    • View Profile
bublcam support.
« on: September 01, 2015, 12:49:21 AM »
Spherical 360 stitched cameras are becoming more and more common.  It would be nice to have an option similar to the fisheye option to import these photos.

I admit, I've yet to try this with fisheye, but because of the innacuracies of the stitching, I can't see it working.  It needs to have a sort of tolerance added to the areas of stitching.  PHotoscan would need to know where these are and treat them differently or mask them.

Alexey Pasumansky

  • Agisoft Technical Support
  • Hero Member
  • *****
  • Posts: 14103
    • View Profile
Re: bublcam support.
« Reply #1 on: September 01, 2015, 02:08:26 AM »
Hello MeHoo,

PhotoScan Pro supports panoramas in equirectangular representation as input images.
Best regards,
Alexey Pasumansky,
Agisoft LLC

MeHoo

  • Full Member
  • ***
  • Posts: 136
    • View Profile
Re: bublcam support.
« Reply #2 on: September 01, 2015, 02:10:42 AM »
I'll test it out tonight, but I just forsee the stitching errors causing problems... and auto-masking of the stitch "zones" would be a nice feature I think.

I'll see how it works tonight.

alessio

  • Newbie
  • *
  • Posts: 1
    • View Profile
Re: bublcam support.
« Reply #3 on: September 16, 2015, 08:39:38 PM »
i already testedPanoramic images  both with ricoh Theta (wich gives only prestitched Images)
and with source file coming from Nikon D800E and 10mm
the result are quite different plus using a nodal camera gives better result
a good spherical camera would be nice in this field IF can give also the raw unstitched footage to obtain the better from both world