Forum

Author Topic: error: bad allocation (not enough memory) only on 1.2 (1.2.3)  (Read 5740 times)

tutoss

  • Newbie
  • *
  • Posts: 49
    • View Profile
error: bad allocation (not enough memory) only on 1.2 (1.2.3)
« on: January 28, 2016, 05:03:03 PM »
Hi,
i got this error with this version in the alignment step. Is a big old Project (8600 images) and i reprocessing it for test purposes.
With 1.0 and 1.1 is processed without issues in the same pc (64 gb ram) and i processed projects with 21000 images on v1.1 without problems  :-\.

Alexey Pasumansky

  • Agisoft Technical Support
  • Hero Member
  • *****
  • Posts: 14813
    • View Profile
Re: error: bad allocation (not enough memory) only on 1.2 (1.2.3)
« Reply #1 on: January 28, 2016, 05:14:59 PM »
Hello tutoss,

Are you sure that you have installed 64-bit version of PhotoScan? Also processing log related to the alignment stage will be helpful.
Best regards,
Alexey Pasumansky,
Agisoft LLC

tutoss

  • Newbie
  • *
  • Posts: 49
    • View Profile
Re: error: bad allocation (not enough memory) only on 1.2 (1.2.3)
« Reply #2 on: January 28, 2016, 06:21:11 PM »
Hi Alexey,
Yes, is the 64bit version (checked in about Photoscan...)

Wetransfer link of the log:
http://we.tl/qR37DiWhpn

settings used (same on 2014 (1.0 i think) and 2015 with Photoscan 1.2.1 due to expansion of the project (more images)):
accuracy: high
pair preselection: reference
key point limit: 40000
tie point limit: 0

Precalibrated camera with same file on both years

The first error is with all images referenced but with the elevations forced to zero
The second error is with all images without Z modification (original process)
The third error is the abort of the current process (half of images)

Regards,

Tutoss

Alexey Pasumansky

  • Agisoft Technical Support
  • Hero Member
  • *****
  • Posts: 14813
    • View Profile
Re: error: bad allocation (not enough memory) only on 1.2 (1.2.3)
« Reply #3 on: January 28, 2016, 07:51:05 PM »
Hello Tutoss,

Thank you for the log.

Could you please check if the matching points are present in this project (view points option in the Photo view), if so, please save the project as PSZ and send the link to it to our support (support@agisoft.com). We'll try to reproduce the problem with the scene structure estimation based on the existing matches.
Best regards,
Alexey Pasumansky,
Agisoft LLC

tutoss

  • Newbie
  • *
  • Posts: 49
    • View Profile
Re: error: bad allocation (not enough memory) only on 1.2 (1.2.3)
« Reply #4 on: January 29, 2016, 10:59:02 PM »
Alexey,
there is uploading via wetransfer, splitted in two files.

Chunk properties: