model "upside down" rotated

[Napo]

Hello,

I am getting an upside down oriented model in Agisoft, is something like 180 degree rotated...  I've doble checked  that I haven't confused my easting/northing coordinates when I import my GCP's. Can you please shed some light on this matter??

Thanks in advance,
Napo

[Alexey Pasumansky]

Hello Napo,

Are you using only GCPs for referencing or also camera positions? Also have you checked that you have defined correct coordinate system?

[Napo]

Alexey, thanks for your response.

I ran the model with and without camera positions, and it has the same problem. I tried with wgs84(EPSG::3326) and WGS84/UTM zone 11N(EPSG::32611) for the reference of the GCP's. Should I set the coordinates system somewhere else?

[Alexey Pasumansky]

Hello Napo,

The coordinate system should be set up in the Reference pane settings dialog. If you still have issues, please send us the aligned project in PSZ format to support@agisoft.com.

[Napo]

Hi again,

I am still having problems to get the elevation model, I tried several ways to correct my point cloud without any success, my resulting model is upside down. I checked several times my coordinate system of my GCP's (UTM 11N), and seems like this is not the probem.

I realized that the coordinates (N,E or lat,long) in the reference panel changed too much before and after set the coordinate system, I mean the coordinates turns into strange values. Can you please help me to find out what the problem is??


I sent my psz file to support@agisoft.com.

Thanks so much in advance,
Napo