Forum

Author Topic: Different cameras for a one spot  (Read 3677 times)

mzaa

  • Newbie
  • *
  • Posts: 15
    • View Profile
Different cameras for a one spot
« on: September 09, 2016, 09:28:38 AM »
Can I use a different cameras for a one spot(building)?
From the air(roof), using quadrocopters.
From the ground(walls) - dlsr.

ekbmuts

  • Full Member
  • ***
  • Posts: 142
    • View Profile
Re: Different cameras for a one spot
« Reply #1 on: September 09, 2016, 10:40:39 PM »
I've not done a lot of drone work (if any) but I can tell you that I have often shot models with multiple different cameras from different manufacturers and different lenses and the results were fine.  I think this method demands that Photoscan do a little more work/calculation, but it comes out.

Give it a shot.  Then you'll know for yourself.

Jon

mzaa

  • Newbie
  • *
  • Posts: 15
    • View Profile
Re: Different cameras for a one spot
« Reply #2 on: September 10, 2016, 07:38:41 PM »
You processed all photos together?

ekbmuts

  • Full Member
  • ***
  • Posts: 142
    • View Profile
Re: Different cameras for a one spot
« Reply #3 on: September 10, 2016, 11:49:30 PM »
Yes.  From a Sony, a Canon and a Nikon.  All processed at once.  Came  out quite nicely.

Jon

mzaa

  • Newbie
  • *
  • Posts: 15
    • View Profile
Re: Different cameras for a one spot
« Reply #4 on: September 13, 2016, 03:56:37 PM »
THX


Yes.  From a Sony, a Canon and a Nikon.  All processed at once.  Came  out quite nicely.

Jon