Forum

Author Topic: Agisoft PhotoScan 1.3.0 pre-release  (Read 188110 times)

Dmitry Semyonov

  • Agisoft Technical Support
  • Full Member
  • *****
  • Posts: 200
    • View Profile
Agisoft PhotoScan 1.3.0 pre-release
« on: October 09, 2016, 12:09:45 AM »
Pre-release version of Agisoft PhotoScan 1.3.0 is available for download.

This pre-release is considered as unstable and is not recommended for production use.

Please let us know if you have any problems using this version.

Please post problems and/or questions concerning other PhotoScan version in separate topics.

This topic will be removed when the final 1.3.0 version is released.

Note
Project files created with 1.3.0 version can't be opened with earlier versions.

EDIT:
PhotoScan 1.3.0 build 3772 was finally released. Thank you for useful feedback.

Please use the links on the main PhotoScan page for download:
Download Installers
« Last Edit: February 05, 2017, 07:20:26 PM by Dmitry Semyonov »
With best regards,
Dmitry Semyonov
Agisoft

Paulo

  • Hero Member
  • *****
  • Posts: 1295
    • View Profile
Re: Agisoft PhotoScan 1.3.0 pre-release
« Reply #1 on: October 09, 2016, 01:45:28 AM »
Hello,

I installed version 1.3.0 o my Windows 10 computer.

After  install, i run program and I get message that since 1.2.5, I must register again entering my valid stand alone activation code (which was working well with 1.2.6). I did and got error relating to Rehostable id....see attachment

I am now reinstalling 1.2.6 since 1.3 cannot be activated....

Please help,

Regards,
Best Regards,
Paul Pelletier,
Surveyor

RHenriques

  • Full Member
  • ***
  • Posts: 225
    • View Profile
Re: Agisoft PhotoScan 1.3.0 pre-release
« Reply #2 on: October 09, 2016, 01:59:48 AM »
Hi Dmitry.
I have the same problem with registration. After one crash I was not able to register the app anymore. The only way is to completely delete the application files and copy them again to the disk. The registration is then required again. Before the crash, I was able to open a project done with a drone with Rolling Shutter issues. I had troubles to find this new (and very welcome) feature. How do we access it? Is it automatic and user input independent or is there an option to activate and parameters to change anywhere?
Cheers
« Last Edit: October 09, 2016, 02:02:32 AM by RHenriques »

Alexey Pasumansky

  • Agisoft Technical Support
  • Hero Member
  • *****
  • Posts: 14796
    • View Profile
Re: Agisoft PhotoScan 1.3.0 pre-release
« Reply #3 on: October 09, 2016, 03:04:45 AM »
Hello pap1956 and RHenriques,

Have you tried using Remove Rehostable Id as suggested?
Best regards,
Alexey Pasumansky,
Agisoft LLC

Paulo

  • Hero Member
  • *****
  • Posts: 1295
    • View Profile
Re: Agisoft PhotoScan 1.3.0 pre-release
« Reply #4 on: October 09, 2016, 03:11:52 AM »
Alexey,

yes, I have and got error message seen in Console pane....So version is not activated (demo)
Best Regards,
Paul Pelletier,
Surveyor

RHenriques

  • Full Member
  • ***
  • Posts: 225
    • View Profile
Re: Agisoft PhotoScan 1.3.0 pre-release
« Reply #5 on: October 09, 2016, 03:38:55 AM »
Hi Alexey

I'm using the MacOSX version and in this case  the "Remove Rehostable Id" dialogue does not appear.
I cannot simply enter my serial number because the app says that it's already in use. In another computer I was able to register once but, after a reopen, the app asks for the serial number again and it's no longer possible to activate the app.
Cheers


Alexey Pasumansky

  • Agisoft Technical Support
  • Hero Member
  • *****
  • Posts: 14796
    • View Profile
Re: Agisoft PhotoScan 1.3.0 pre-release
« Reply #6 on: October 09, 2016, 06:06:54 PM »
I can sugest the following (when applicable to the OS used), perform a clean installation previously removing the old version folder, run PhotoScan with the administrator privelegies.
Best regards,
Alexey Pasumansky,
Agisoft LLC

Paulo

  • Hero Member
  • *****
  • Posts: 1295
    • View Profile
Re: Agisoft PhotoScan 1.3.0 pre-release
« Reply #7 on: October 09, 2016, 06:19:58 PM »
Hi Alexey,

I uninstalled version 1.2.6 and then proceeded to re install 1.3.0 and still had to re enter my license code and got same error related to Rehostable id....

What could I do?

Best regards,
Best Regards,
Paul Pelletier,
Surveyor

Alexey Pasumansky

  • Agisoft Technical Support
  • Hero Member
  • *****
  • Posts: 14796
    • View Profile
Re: Agisoft PhotoScan 1.3.0 pre-release
« Reply #8 on: October 10, 2016, 12:05:23 AM »
Hello pap1956,

Can you try to start PhotoScan as Administrator and then press Remove hostid button?
Best regards,
Alexey Pasumansky,
Agisoft LLC

Paulo

  • Hero Member
  • *****
  • Posts: 1295
    • View Profile
Re: Agisoft PhotoScan 1.3.0 pre-release
« Reply #9 on: October 10, 2016, 01:36:04 AM »
Alexey,

I tried again running version 1.3.0 as Administrator and get same error:

- in command window I get checkout license error message;
- in GUI, I get message that license has to be activated;
- I enter license code;
- In rehostable window I click rehost id and get same error as previous attemps....

so I really would like to be able to test the PS features!

Best,
Best Regards,
Paul Pelletier,
Surveyor

Alexey Pasumansky

  • Agisoft Technical Support
  • Hero Member
  • *****
  • Posts: 14796
    • View Profile
Re: Agisoft PhotoScan 1.3.0 pre-release
« Reply #10 on: October 10, 2016, 09:36:27 AM »
Hello pap1956,

Please send us an e-mail to support@agisoft.com, for more detailed discussion and investigation.
Best regards,
Alexey Pasumansky,
Agisoft LLC

bortoman

  • Newbie
  • *
  • Posts: 18
    • View Profile
Re: Agisoft PhotoScan 1.3.0 pre-release
« Reply #11 on: October 10, 2016, 01:00:05 PM »
DNG or CR2 RAW files from CANON still don't work properly (100D, 5D MkII, 5D MkIII, and 5D MkIV tested)...
See topic: http://www.agisoft.com/forum/index.php?topic=5659.msg28639#msg28639

RHenriques

  • Full Member
  • ***
  • Posts: 225
    • View Profile
Re: Agisoft PhotoScan 1.3.0 pre-release
« Reply #12 on: October 10, 2016, 01:41:42 PM »
Hi Alexey

Trashed everything related with the stable version of Photoscan. When I try to input my serial number in the 1.3.0 version i get the message that the "Activation Key is already in use". As I told above, I'm using the MacOS version.
Cheers

carbon

  • Newbie
  • *
  • Posts: 5
    • View Profile
Re: Agisoft PhotoScan 1.3.0 pre-release
« Reply #13 on: October 10, 2016, 08:45:40 PM »
hello,
i can't run 1.3.0 on osx 10.10.5, is 10.11 required from now on? i am no quite keen in upgrading the os right now..
thanks

Alexey Pasumansky

  • Agisoft Technical Support
  • Hero Member
  • *****
  • Posts: 14796
    • View Profile
Re: Agisoft PhotoScan 1.3.0 pre-release
« Reply #14 on: October 10, 2016, 10:26:34 PM »
Hello RHenriques,

Is it possible that you have tried to activate the license on another computer? If not, than could you please specify, if the active user account has full write access rights on the computer? I also suggest to send the e-mail to support@agisoft.com with the link to this topic, so that our support team could perform more detailed investigation.
Best regards,
Alexey Pasumansky,
Agisoft LLC