Forum

Author Topic: mask for removing spot on the lens  (Read 1696 times)

fberna

  • Newbie
  • *
  • Posts: 20
    • View Profile
mask for removing spot on the lens
« on: November 23, 2016, 01:05:30 PM »
hello,

I had to fly the phantom 4 drone in a heavy rain situation and a spot of condense built up on the lens.


As a result all the pictures show this spot. Since the spot remains on the same place on the lens but the drone was moving, I have a blur on the most of the resulting ortomosaic.

Is there a way to mask the same place on every photo? I mean the same place related to the lens, not on the subject taken.


This way I would use the remaining part -not blurred- on each photo. Since I have taken a lot of them, I would have more than enough coverage of what I need.

Alexey Pasumansky

  • Agisoft Technical Support
  • Hero Member
  • *****
  • Posts: 13990
    • View Profile
Re: mask for removing spot on the lens
« Reply #1 on: November 23, 2016, 01:30:28 PM »
Hello fberna,

You can refer to the similar topic:
http://www.agisoft.com/forum/index.php?topic=1719

So just specify the static file name and apply to all or selected images.
Best regards,
Alexey Pasumansky,
Agisoft LLC

fberna

  • Newbie
  • *
  • Posts: 20
    • View Profile
Re: mask for removing spot on the lens
« Reply #2 on: November 23, 2016, 06:04:58 PM »
thanks for the replay.

I was using the mask and was able to obtain a good enough result.

Photoscan is indeed a very good program