Increased errors when processing with Yaw, Pitch and Roll data

[minesapint_96]

When processing without Yaw, pitch and roll data as expected there is a 2.11m error. When I add Yaw, Pitch and Roll data errors rise to 70-80m. I thought by adding this extra data errors should decrease?

Thanks for your time.

[Alexey Pasumansky]

Hello minesapint_96,

By default the camera accuracy for the orientation angles is 2 degrees, so if the camera orientation information is incorrect, it will affect the georeferencing. You can but some big values to the Camera Accuracy (deg) field in the Reference pane settings dialog to lower the weight of the orientation angles in the georeferencing and optimization procedures.

[minesapint_96]

Altered the camera accuracy by 90 and error has produced. Guessing my camera orientation or settings are why out? See attached

[Alexey Pasumansky]

Hello minesapint_96,

I suggest to use several thousands for the degree accuracy, then press Update button on the pane and then switch to the Error values tab to see, how the errors are distributed.

180 degrees for Roll seems strange, though, don't thing camera is pointing to the sky.