Forum

Author Topic: Import section lines  (Read 2937 times)

andreapassa

  • Newbie
  • *
  • Posts: 14
    • View Profile
Import section lines
« on: January 26, 2018, 02:53:41 PM »
Hi everyone, is It possible ti import from a dxf file of autocad the section lines so that, when i'll import them in photoscan, i Will are them in the model, or in the dem ecc...?

Alexey Pasumansky

  • Agisoft Technical Support
  • Hero Member
  • *****
  • Posts: 14813
    • View Profile
Re: Import section lines
« Reply #1 on: January 26, 2018, 03:07:04 PM »
Hello andreapassa,

You can import shapes from DXF files to PhotoScan. If the shapes have altitude information, you'll see them both in Model and Ortho view mode. 2D shapes will be displayed in the Ortho view mode only.
Best regards,
Alexey Pasumansky,
Agisoft LLC

andreapassa

  • Newbie
  • *
  • Posts: 14
    • View Profile
Re: Import section lines
« Reply #2 on: January 27, 2018, 03:04:37 PM »
thank you alex, i'll try it

andreapassa

  • Newbie
  • *
  • Posts: 14
    • View Profile
Re: Import section lines
« Reply #3 on: January 27, 2018, 04:38:09 PM »
the problem remains, Alexey. i have a dxf file with a polyline and when i try to import it in photoscan it does not show neither in the model space or in the ortho space. what could be the problem?

Alexey Pasumansky

  • Agisoft Technical Support
  • Hero Member
  • *****
  • Posts: 14813
    • View Profile
Re: Import section lines
« Reply #4 on: January 27, 2018, 04:54:59 PM »
Hello andreapassa,

Can you specify, which import settings you are using (which coordinate system you are selecting) and also specify the coordinate system of the chunk and of the orthomosaic.
Best regards,
Alexey Pasumansky,
Agisoft LLC

andreapassa

  • Newbie
  • *
  • Posts: 14
    • View Profile
Re: Import section lines
« Reply #5 on: January 27, 2018, 05:03:40 PM »
WGS 84/ UTM ZONE 32N

andreapassa

  • Newbie
  • *
  • Posts: 14
    • View Profile
Re: Import section lines
« Reply #6 on: January 27, 2018, 05:30:17 PM »
Maybe i did not explain myself. my goal is to import in photoscan a line or polyline ( as if it was a project of a road) and then export the profile made with that imported polyline or line

frank.stremke

  • Full Member
  • ***
  • Posts: 206
    • View Profile
Re: Import section lines
« Reply #7 on: January 27, 2018, 10:07:17 PM »
hi
i have done similar things and it works great
check that you use the same EPSG code and compare coordinates maybe on one dataset you have the zone number included in the easting or something like that
frank